AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (762.7 KB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese | Open Access

Design of continuous streamline tracing waverider forebody inlet

Science and Technology on Scramjet Laboratory of Hypervelocity Aerodynamics Institute, CARDC, Mianyang 621000, China
Show Author Information

Abstract

A large amount of research work has been conducted on the design of high speed waveriders and engine inlets based on the streamline tracking method, but the integrated design of the forebody of hypersonic vehicles and the scramjet inlet has always been difficult. In order to improve the total pressure recovery and flow capture performance of the integrated forebody and inlet of hypersonic vehicles, the entire base flowfield is divided into a shock compression and an isentropic compression in sequence based on the methods of previous waverider forebody design and inlet compression surface streamline tracing, and a completely continuous streamline tracing is achieved connecting the forebody shockwave, the outer compression surface, the inner compression surface of the inlet, the reflection shockwaves and the inlet throat. The generation of the three-dimensional spanwise surface is controlled by a osculating method, which realizes the design of continuous stream surface. The longitudinal base flowfield is constructed by combining the shock compression flowfield generated by the cross-marching characteristic method with the isentropic compression flowfield generated by the reversed Prandtl-Meyer flow, which only requires constrains of the forebody shockwave shape and the inlet throat. All control lines are described by a kind of quartic spline curve. This is a unified method for the integrated forebody and inlet design of hypersonic vehicles based on reference flowfields of the internal and external cones. Its main advantages are that it has relatively higher flow capture and total pressure recovery coefficients and can be widely used in the integrated design of internal and external flow of hypersonic vehicles.

CLC number: V211.48;V411.4 Document code: A

References

【1】
【1】
 
 
Acta Aerodynamica Sinica
Pages 114-118

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
WU Y, HE Y, WEI F, et al. Design of continuous streamline tracing waverider forebody inlet. Acta Aerodynamica Sinica, 2022, 40(1): 114-118. https://doi.org/10.7638/kqdlxxb-2021.0144

630

Views

6

Downloads

0

Crossref

3

Scopus

2

CSCD

Received: 29 July 2021
Revised: 08 October 2021
Published: 29 December 2021
© The journal of Acta Aerodynamica Sinica.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).