AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (25 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese

Fuel distribution characteristics of variable area injector with lobe structure

Yusong BAI, Zhenyao LI( ), Ziyi FENG, Yue HUANG, Yancheng YOU
School of Aerospace Engineering, Xiamen University, Xiamen 361000, China
Show Author Information

Abstract

The flow rate of the extra-cylinder of the variable-cycle engine will change greatly with the transition of the working mode, and the corresponding internal/external contour blending flow brings challenges to the fuel injection scheme of the afterburner. In order to solve this problem, this paper numerically simulates the fuel distribution characteristics of afterburner in variable cycle engine under different modes, explores the influence of wide-range airflow change on fuel distribution, and forms a fuel injection optimization strategy for multi-modal afterburner. The results show that the velocity component of the afterburner mixture along the radial direction and the flow vortex induced by the lobe mixer are the key factors affecting the radial/circumferential diffusion of the fuel, respectively. In the small bypass ratio mode, the connotation-dominated high-temperature and high-speed flow makes the fuel diffusion velocity relatively consistent in a wide range. However, the radial velocity and vortex distribution of the gas change significantly in the large bypass ratio mode, resulting in obvious differences in the fuel diffusion velocity in different regions, which affects the uniformity of fuel distribution. On this basis, an optimization strategy is proposed to moderately increase the fuel flow rate of the nozzle at the middle position, and the results show that the uniformity of fuel distribution will be increased by up to 33.04%.

CLC number: V231.2 Document code: A Article ID: 1000-6893(2025)22-131943-14

References

【1】
【1】
 
 
Acta Aeronautica et Astronautica Sinica

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
BAI Y, LI Z, FENG Z, et al. Fuel distribution characteristics of variable area injector with lobe structure. Acta Aeronautica et Astronautica Sinica, 2025, 46(22). https://doi.org/10.7527/S1000-6893.2025.31943

778

Views

10

Downloads

0

Crossref

1

Scopus

0

CSCD

Received: 06 March 2025
Revised: 06 May 2025
Accepted: 17 June 2025
Published: 30 June 2025
© 2025 The Journal of Acta Aeronautica et Astronautica Sinica