AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.5 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese

Review on analysis and control technology of curing residual stress in solid motor propellants

Baoshi YU1,2, Yongjun LEI1,2,3, Zhibin SHEN1,2, Dapeng ZHANG1,2( )
College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China
Hunan Key Laboratory of Intelligent Planning and Simulation for Aerospace Missions, Changsha 410073, China
Rocket Force University of Engineering, Xi'an 710025, China
Show Author Information

Abstract

A certain residual stress will accumulate during the curing and cooling process of Solid Rocket Motor (SRM) grain, which will affect the structural integrity of the SRM. Therefore, it is of great significance to analyze the Cure-induced Residual Stress (CRS) of the propellant grain and explore effective control methods for ensuring the reliability of space vehicles and the safety of weapons and equipment. In this paper, the research progress on the generation mechanism, release method, detection technique and inversion prediction of the CRS of propellant grain is reviewed. This paper summarizes the current status and shortcomings of the structural integrity research of SRM, considering the CRS of propellant grain, as well as the development of its control methods and engineering applications. Based on the formation causes and release mechanism of the CRS and the release mechanisms in propellant grain structures, corresponding control methods and ideas for engineering application development are proposed. The analysis shows that the co-design method combining curing process control and structural configuration optimization can effectively control the CRS of the propellant grain, and establishing a standard test system is the key to validate the control method.

CLC number: V214.4;O344.7 Document code: A Article ID: 1000-6893(2025)08-031083-16

References

【1】
【1】
 
 
Acta Aeronautica et Astronautica Sinica

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
YU B, LEI Y, SHEN Z, et al. Review on analysis and control technology of curing residual stress in solid motor propellants. Acta Aeronautica et Astronautica Sinica, 2025, 46(8). https://doi.org/10.7527/S1000-6893.2024.31083

1093

Views

23

Downloads

0

Crossref

7

Scopus

0

CSCD

Received: 20 August 2024
Revised: 18 September 2024
Accepted: 14 October 2024
Published: 16 October 2024
© 2025 The Journal of Acta Aeronautica et Astronautica Sinica