AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (6 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

Drive structure and path tracking strategy of omnidirectional AGV

Songsong ZHANG, Xiaojun WU( ), He ZHAO, Peng WANG, Huan WANG
School of Mechanical and Electrical Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
Show Author Information

Abstract

As an important handling tool in the modern intelligent warehousing and logistics industry, omnidirectional automated guided vehicles (AGVs) have greatly improved the efficiency of warehousing and handling operations. However, the existing omnidirectional AGVs have problems such as insufficient bearing capacity of drive structure, poor path tracking accuracy, and poor correction effect. A new type of omnidirectional AGV with two-wheel differential full steering drive mechanism is designed, and a path tracking control strategy using fuzzy neural network PID (FNN-PID) control is proposed to improve the driving performance and path tracking effect of the omnidirectional AGV. Firstly, the new differential full steering drive structure is designed, and its kinematics model is established, the new drive structure has better load-bearing performance. In addition, according to the established kinematics model, the relationship between speed and rotation angle in four different motion modes is analyzed. Finally, the FNN-PID control strategy is used to track and correct the omnidirectional AGV path, and the conjugate gradient (i.e., FR) method is used to learn and train neural network weights, which can improve the response performance of the control system. The proposed control strategy is compared with the traditional PID control strategy through simulation and semicircular path tracking experiments. The simulation and experimental results show that the proposed control strategy can quickly eliminate the deviation in 2 s. The distance deviation is within 1 cm, and the heading deviation is about 1° in the stable tracking stage. The new full steering drive structure has better drive performance and the FNN-PID control strategy using the FR method to learn and train can more effectively track and control the path. The new structure and control method have a certain significance for the precise handling of omnidirectional AGVs.

References

【1】
【1】
 
 
Journal of Measurement Science and Instrumentation
Pages 431-441

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
ZHANG S, WU X, ZHAO H, et al. Drive structure and path tracking strategy of omnidirectional AGV. Journal of Measurement Science and Instrumentation, 2023, 14(4): 431-441. https://doi.org/10.62756/jmsi.1674-8042.2023048

1316

Views

129

Downloads

1

Crossref

0

CSCD

Received: 17 February 2023
Published: 01 December 2023
© The Author(s) 2023.

The articles published in this open access journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, distribution and reproduction in any medium, provided the original work is properly cited.