Journal Home > Volume 13 , Issue 1

In this study, different chemical methods were used to synthesize ZnO nanorod, TiO2 nanotube and ZnO/TiO2 nanostructure as high sensitivity vapor sensor for ethanol. The surface topography of ZnO nanorod, TiO2 nanotube and ZnO/TiO2 was studied by using the scanning electron microscopy (SEM). The X-rays diffraction showed the appearance of (101) ZnO which has single crystalline with a hexagonal wurtzite while TiO2 has been crystallized in a tetragonal with the preferential orientation of the crystallinity with the prominent (111). The relation between resistance-time showed high sensitivity for ZnO/TiO2 and was found to be around 20-80% at different working temperature. ZnO/TiO2 sensor was the most sensitive to ethanol vapor.


menu
Abstract
Full text
Outline
About this article

Synthesis of ZnO Nanorod/TiO2 Nanotube and its Application as a Resistive Gas Sensor

Show Author's information Marwa Abdul Muhsien Hassan( )NazarKhalaf Mahan( )
Department of Physics, College of Science, Mustansyriah University, Baghdad, 00964, Iraq

Abstract

In this study, different chemical methods were used to synthesize ZnO nanorod, TiO2 nanotube and ZnO/TiO2 nanostructure as high sensitivity vapor sensor for ethanol. The surface topography of ZnO nanorod, TiO2 nanotube and ZnO/TiO2 was studied by using the scanning electron microscopy (SEM). The X-rays diffraction showed the appearance of (101) ZnO which has single crystalline with a hexagonal wurtzite while TiO2 has been crystallized in a tetragonal with the preferential orientation of the crystallinity with the prominent (111). The relation between resistance-time showed high sensitivity for ZnO/TiO2 and was found to be around 20-80% at different working temperature. ZnO/TiO2 sensor was the most sensitive to ethanol vapor.

Keywords: Gas sensor, TiO2 nanotube, SEM, ZnO nanorod, ZnO/TiO2

References(43)

[1]

M. Saleem, L. Fang, H.B. Ruan, et al., Effect of zinc acetate concentration on the structural and optical properties of ZnO thin films deposited by Sol-Gel method. International Journal of Physical Sciences, 2012, 7(23): 2971-2979.

[2]
B. Fatma, Ü. Mustafa, Effect of doping at TiO2-nanotubular gas sensors. Proceedings of Sensors + Test Conference – Sensors. Istanbul Technical University (ITU), 2011.
[3]

A. Wisitsoraat, A. Tuantranont, E. Comini, et al., Gas-sensing charcterization of TiO2-ZnO based thin film. IEEE Sensors, 2006: 964- 967.

[4]

R. Rella, J. Spadavecchia, M. G, Manera, et al., Acetone and ethanol solid-state gas sensors based on TiO2 nanoparticles thin film deposited by matrix assisted pulsed laser evaporation. Sensors and Actuators, 2007, 127: 426-431.

[5]

C.Y. Liu, C. F. Chen, and J.P. Leu, Fabrication and CO sensing properties of mesostructured ZnO gas sensors. Journal of the Electrochemical Society. 2009, 156: J16: J19.

[6]

F.A. Mahmoud, G. Kiriakidis, Nanocrystalline ZnO thin film for gas sensor application. Journal of Ovonic Research, 2009, 5: 15-20.

[7]

M. Radecka, M. Jasiňski, J.K. Kafel, et al., TiO2-based nanopowders for gas sensor. Ceramic Materials. 2010, 62: 545-549.

[8]

S. Benkara, S. Zerkout, Preparation and characterization of ZnO nanorods grown into aligned TiO2 nanotube array. J. Mater. Environ. Sci., 2010, 1: 173-188.

[9]

S. Pawar, M. Chougule, S. Patil, et al., Fabrication of nanocrystalline TiO2 thin film ammonia vapor sensor. Journal of Sensor Technology. 2011, 1: 9-16.

[10]

K. Mirabbaszadeh, M. Mehrabian, Synthesis and properties of ZnO nanorods as ethanol gas sensors. Phys. Scr., 2012, 85: 8.

[11]

A.A. Haidry, P. Durina, M. Truchly, et al., Studies of hydrogen gas sensing properties of anatase TiO2 thin films prepared by magnetron sputtering. International Meeting on Chemical Sensors, 2012: 1271-1274.

[12]

W.Y. Wang, B.R. Chen, Characterization and photocatalytic activity of TiO2 nanotube films prepared by anodization. International Journal of Photoenergy, 2013: 1-12.

[13]

A. Youchi, R. Leinen, D. Martĭn, et al., Preparation and characterization of transparent ZnO thin films obtained by spray pyrolysis. Thin Solid Films, 2003, 426: 68-77

[14]

A. Oģuzer, A.A. Farha, C. Gŭmŭş, et al., Morphology of Zinc oxide thin films deposited by spray pyrolysis. Optoelectronics and advanced materials - Rapid communications, 2011, 5: 1286-1291.

[15]

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, et al., Effects of annealing treatment on optical properties of anatase TiO2 thin films. International Journal of Chemical and Biological Engineering, 2008, 1: 92-96.

[16]
J.M.A.C. Pires, Thin films for gas sensors. Ph. D. Thesis. Departamento de Física, Universidade do Minho. 2003.
[17]

E. Comini, G. Faglia, G. Sberveglieri, et al., Stable and highly sensitive gas sensors based on semiconducting oxide nanobelts. Appl. Phys. Lett., 2002, 81: 1869-1871.

[18]

G. Korotcenkov, Metal oxides for solid-state gas sensors: what determines our choice. Mater. Sci. Eng., 2007, 139: 1-23.

[19]

Y.F. Sun, S.B. Liu, F.L. Meng, et al., Metal oxide nanostructures and their gas sensing properties: A review. Sensors, 2012, 12: 2610-2631.

[20]
V.O. Kononenk, N.A. Redkin, N.A. Baranov, et al., ZnO nanorods: Synthesis by catalyst-free CVD and thermal growth from salt composites and application to nanodevices. 2012.
DOI
[21]

O. Lupan, L. Chow, G. Chai, et al., Focused-ion-beam fabrication of ZnO nanorod-based UV photodetector using the in-situ lift-out technique. Phys. Stat. Sol., 2008, 205: 2673-2678.

[22]

J.Y. Park, M.S. Woo, C.M. Sang, et al., Fabrication of a highly sensitive chemical sensor based on ZnO nanorod arrays. Nanoscale Res Lett. 2010, 5: 353-359.

[23]
S.Y. Tong, X.R. Hu, Z.Q. Fung, et al., Surface modification of TiO2 and ZnO nano surfaces and applications. Dept. of Physics and Materials Science, City University of Hong Kong. 2010.
DOI
[24]

S.H. Kang, J.Y. Kim, H.S. Kim, et al., Formation and mechanistic study of self-ordered TiO2 nanotubes on Ti substrate. Journal of Industrial and Engineering Chemistry, 2008, 14: 52-59.

[25]
C.A. Grimes, Fabrication of TiO2 nanotube arrays by electrochemical anodization: Four synthesis generations. Springer Science + Business Media, LLC, 2009.
DOI
[26]

P.M. Neupane, S. Park, T.S. Bae, et al., Synthesis and morphology of TiO2 nanotubes by anodic oxidation using surfactant based fluorinated electrolyte. Journal of the Electrochemical Society, 2011, 158: C242-C245.

[27]

M. Okuya, A.N. Prokudina, K. Mushika, et al., TiO2 thin films synthesized by the spray pyrolysis deposition (SPD) technique. Journal of the European Ceramic Society, 1999, 19: 903-906.

[28]

N. Lehraki, M.S.S. Aida Abed, N. Attaf, et al., ZnO thin films deposition by spray pyrolysis: Influence of precursor solution properties. Current Applied Physics, 2011, 12: 643-648.

[29]

S. Yoriya, W. Kittimeteeworakul, and N. Punprasert, Effect of anodization parameters on morphologies of TiO2 nanotube arrays and their surface properties. J. Chem. Chem. Eng., 2012, 6: 686-691.

[30]

M.M. Ali, Characterization of ZnO thin films grown by chemical bath deposition. Journal of Basrah Researches, 2011, 37: 49-55.

[31]

M. Wang, L. Zhang, The influence of orientation on the photoluminescence behavior of ZnO thin filmsobtained by chemical solution deposition. Materials Letters, 2009, 63: 301-303.

[32]

Tewari, A. Bhattacharjee, Structural, electrical and optical studies on spray-deposited aluminium-doped ZnO thin films. Indian Academy of Sciences, 2011, 76: 153-163.

[33]

M. Saleem, L. Fang, H.B. Ruan, et al., Effect of zinc acetate concentration on the structural and optical properties of ZnO thin films deposited by sol-gel method. International Journal of Physical Sciences, 2012, 7: 2971-2979.

[34]

Girjeshsingh, S.B. Shrivastava, Deeptijain, et al., Effect of indium doping on zinc oxide films prepared by chemical spray pyrolysis technique. Indian Academy of Sciences, 2010, 33: 581-587.

[35]

W. Tang, D.C. Cameron, Aluminum-doped zinc oxide transparent conductors deposited by the sol-gel process. Thin Solid Films, 1994, 238: 83-87.

[36]

S. Mondal, K.P. Kanta, and P. Mitra, Preparation of ZnO film on p-Si and Ⅰ-Ⅴ characteristics of p-Si/n-ZnO. Materials Research. 2013, 16: 94-99.

[37]

B.V. Rajendra, V. Bhat, and D. Kekuda, Influence of processing parameters on the optical properties of Zinc Oxide thin films grown by spray pyrolysis. International Journal of Emerging Technology and Advanced Engineering, 2013, 3: 82-85.

[38]

J.H. Adawiya, M.S. Raad, and Z.K. Yahya, Nanostructure dopants TiO2 films for gas sensing. Iraqi Journal of Applied Physics, 2011, 7: 27-31.

[39]

J. Chu, X. Peng, Z. Wangand, et al., Sensing performances of ZnO nanostructures grown under different oxygen pressures to hydrogen. Materials Research Bulletin, 2012, 47: 4420-4426.

[40]
K.Z. Yahya, Characterization of pure and dopant TiO2 thin films for gas sensors applications. Ph. D. Thesis. Department of Physics, College of Science, University of Technology, 2010.
[41]

L. Nulhakim, Nugraha, A. Nuruddin, et al., Al doped ZnO thin films for ethanol sensors. Proceedings of the 4th Nanoscience and Nanotechnology Symposium, AIP Conference, 2011, 1415: 227-230.

[42]

Y.L. Wang, K.J. Liao, and C.Y. Kong, Study on sensitivity of nano-grain ZnO gas sensors. Journal of Wide Bandgap Materials, 2002, 10: 113-120.

[43]

S. Pawar, M. Chougule, S. Patil, et al., Fabrication of nanocrystalline TiO2 thin film ammonia vapor sensor. Journal of Sensor Technology, 2011, 1: 9-16.

Publication history
Copyright
Rights and permissions

Publication history

Received: 15 July 2020
Accepted: 19 December 2020
Published: 27 January 2021
Issue date: March 2021

Copyright

© Marwa Abdul Muhsien Hassan, Nazar Khalaf Mahan.

Rights and permissions

This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Return