AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Home Capillarity Article
PDF (1.2 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Original Article | Open Access

Effect of saturation degree on capillary-driven transition from fluidization to plug formation in multiphase systems

Department of Oil and Gas Technologies, Perm National Research Polytechnic University, Perm 614990, Russia
State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221008, P. R. China
Show Author Information

Abstract

Capillary effects play a key role in gas-liquid-solid multiphase systems, determining particle connectivity and the transition between flow regimes. Existing studies typically focus on either completely dry or fully saturated media. This work theoretically and experimentally investigates the influence of liquid saturation in a granular medium on the transition from fluidization to formation of a stable sand plug during gas filtration. Laboratory studies and mathematical modeling of the process were conducted, followed by comparison of the results. The setup consisted of a tube containing a granular material, with gas injected from the bottom. Mathematical modeling demonstrated a non-monotonic dependence of the flow regime on the degree of saturation. For the initial parameters, two intervals were identified in which the sand plug detaches moves upward in a piston-like manner under the action of gas. Laboratory studies qualitatively confirmed the existence of these calculated regimes. The results show that the transition process from fluidization to plug formation is influenced by the degree of pore space saturation, as well as the size and wettability of the solid particles. The mechanism of this transition is explained by identifying several system states, characterized by differences in capillary pressure and particle cohesion due to the formation of capillary bridges. These findings indicate that the degree of pore space saturation plays a key role in shaping the flow regime in gas-liquid-solid multiphase systems through capillary effects.

References

【1】
【1】
 
 
Capillarity
Pages 14-28

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Ivanov Z, Turbakov M, Kozhevnikov E, et al. Effect of saturation degree on capillary-driven transition from fluidization to plug formation in multiphase systems. Capillarity, 2026, 20(1): 14-28. https://doi.org/10.46690/capi.2026.07.03

9

Views

0

Downloads

0

Crossref

0

Scopus

Received: 10 June 2026
Revised: 30 June 2026
Accepted: 12 July 2026
Published: 14 July 2026
© The Author(s) 2026.

This article is distributed under the terms and conditions of the Creative Commons Attribution (CC BY-NC-ND) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.