AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (17.3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Physical Modeling of Degradation Failure Mechanism of Rhenium–Tungsten Filaments in Mass Spectrometers of Environmental Control and Life Support System: Electromigration, Thermal Effect, and Coupled Oxidation

Yang Miao1( ), Zehao Li1, Sen Wang1, Lejia Sun2( ), Haibin Liu1( ), Junjie Liu3, Gang Huang3,4
College of Mechanical & Energy Engineering, Beijing University of Technology, Beijing 100124 China
Key Laboratory of Wide Band-Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi’an 710071, China
China Astronaut Research and Training Center, Beijing 100094, China
National Key Laboratory of Human Factors Engineering, Beijing 100094, China
Show Author Information

Abstract

In aerospace missions, the proper functioning of the environmental control and life support system (ECLSS) is critical to ensuring mission success. As a key gas detection device in the ECLSS, the performance of the rhenium–tungsten (Re–W) filament in the ion source of quadrupole mass spectrometers directly affects the stability and data accuracy of the instrument. However, tungsten alloy filaments may still suffer damage due to thermal stress, electromigration, mild oxidation, and other factors during operation. Therefore, investigating the damage mechanisms of Re–W filaments is of substantial practical importance. This study aims to explore the failure mechanisms of Re–W filaments and provide a basis for performance improvement in practical applications. The paper systematically introduces the working principle of quadrupole mass spectrometers, details the construction of the experimental platform, and conducts filament failure experiments under high-temperature electrified conditions in a vacuum environment. Subsequently, scanning electron microscopy and x-ray diffraction were employed to analyze both intact and damaged Re–W filaments, elucidating their failure mechanisms. Experimental results reveal the potential causes of filament damage during failure processes, including electromigration, thermal-stress-induced damage, and oxidation. This study represents the first systematic investigation into the failure mechanisms of Re–W filaments in quadrupole mass spectrometers, offering experimental evidence and technical support for future performance enhancement strategies. These findings contribute to improving the reliability of ECLSSs and the success rate of aerospace missions.

References

【1】
【1】
 
 
Space: Science & Technology
Article number: 0496

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Miao Y, Li Z, Wang S, et al. Physical Modeling of Degradation Failure Mechanism of Rhenium–Tungsten Filaments in Mass Spectrometers of Environmental Control and Life Support System: Electromigration, Thermal Effect, and Coupled Oxidation. Space: Science & Technology, 2026, 6: 0496. https://doi.org/10.34133/space.0496

17

Views

0

Downloads

0

Crossref

0

Web of Science

0

Scopus

Received: 14 May 2025
Revised: 04 February 2026
Accepted: 04 February 2026
Published: 07 May 2026
© 2026 Yang Miao et al. Exclusive licensee Beijing Institute of Technology Press. No claim to original U.S. Government Works.

Distributed under a Creative Commons Attribution License (CC BY 4.0).