AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (10.8 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Three-Dimensional Simulations Reveal Critical Role of Impactor Shape in Kinetic Impact for Asteroid Defense

Chaokai Zhou1( ), Guanghui Jia1,2
School of Astronautics, Beihang University, Beijing 102206, China
State Key Laboratory of High-Efficiency Reusable Aerospace Transportation Technology, Beijing 102206, China
Show Author Information

Abstract

With the increasing number of confirmed near-Earth asteroids, their potential threat to Earth’s safety grows. Kinetic impact remains the most mature asteroid defense technique. To address the prevalent use of 2-dimensional models and spherical impactors in existing kinetic impact simulation researches, based on LS-DYNA software and secondary development of material models, a 3-dimensional kinetic impact simulation model was established in the context of verification with Double Asteroid Redirection Test impact. The effectiveness of the material model and geometric modeling methods was verified through momentum transfer coefficients. Three-dimensional smooth particle hydrodynamic models for 6 shapes of impactors, including sphere, cube, and cuboid, were established. It was found that the momentum transfer coefficients caused by impactors of different shapes vary by up to 29.4%. The main factor affecting momentum transfer coefficient is the aspect ratio in the envelope size of the impactor. Within the aspect ratio range of 0.35 to 2.83, momentum transfer coefficient increases with aspect ratio. However, as aspect ratio continues to increase further, β diminishes accordingly. The difference in the transverse cross-sectional shape of the impactor under the same aspect ratio only affects the shape of crater in the early excavation stage. The flat cuboid impactor produces an elliptical crater, with a maximum difference of 38% in the long and short axes, but this difference diminishes as the crater expands.

References

【1】
【1】
 
 
Space: Science & Technology
Article number: 0442

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhou C, Jia G. Three-Dimensional Simulations Reveal Critical Role of Impactor Shape in Kinetic Impact for Asteroid Defense. Space: Science & Technology, 2026, 6: 0442. https://doi.org/10.34133/space.0442

2

Views

0

Downloads

0

Crossref

0

Web of Science

0

Scopus

Received: 14 July 2025
Revised: 12 October 2025
Accepted: 16 November 2025
Published: 22 April 2026
© 2026 Chaokai Zhou and Guanghui Jia. Exclusive licensee Beijing Institute of Technology Press. No claim to original U.S. Government Works.

Distributed under a Creative Commons Attribution License (CC BY 4.0).