AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (19.4 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access | Just Accepted

Cation-exchange-induced polarization site engineering in multiphase solid solutions for high-performance electromagnetic wave absorption

Mengjun Han1,2, Zirui Jia2 ( ), Di Lan1 ( ), Zhenguo Gao3, Guanglei Wu2 ( )

1 School of Automotive Materials, Hubei University of Automotive Technology, Shiyan 442002, China

2 College of Chemistry and Chemical Engineering, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China

3 Department of Mechanical Engineering and Research Institute for Smart Energy, The Hong Kong Polytechnic University, Hong Kong 999077, China

Show Author Information

Abstract

To address the bottleneck problem of a single polarization mechanism in electromagnetic wave (EMW) absorbing materials, this study proposes a cation exchange strategy, aiming to enhance the absorption of EMWs by constructing controllable polarization sites in the multiphase solid solution. This study successfully prepared the CuCo2S4@MoS2 composite material using the solvothermal method. Subsequently, through Zn2+ intercalation treatment, Zn2+ selectively undergoes cation exchange with the CuCo2S4 core, forming a substitutional solid solution; at the same time, Zn2+ inserts into the interlayer of MoS2, forming a interstitial solid solution. Moreover, the generation of sulfur vacancies in MoS2 mainly results from the combined effect of the charge balance mechanism and the lattice strain effect. The results show that at 2.1 mm, the minimum reflection loss (RLmin) is -63.72 dB, and when the matching thickness is 1.8 mm, the maximum effective absorption bandwidth (EABmax) is 6.24 GHz. This study proposes a novel controllable polarization site model for multiphase solid solutions, providing a new perspective for the design of efficient EMW absorbing materials.

Graphical Abstract

References

【1】
【1】
 
 
Nano Research

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Han M, Jia Z, Lan D, et al. Cation-exchange-induced polarization site engineering in multiphase solid solutions for high-performance electromagnetic wave absorption. Nano Research, 2026, https://doi.org/10.26599/NR.2026.94909334

77

Views

10

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 16 October 2026
Revised: 09 November 2026
Accepted: 13 November 2026
Available online: 13 November 2026

© The Author(s) 2026. Published by Tsinghua University Press.

This is an open access article under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0, https://creativecommons.org/licenses/by/4.0/)