AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.6 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Regular Paper | Open Access

Commutation Failure Fault Level Calculation Method Under Three-phase-to-ground Faults Considering Multi-factor Influence

Renlong Zhu, Xiaoping Zhou( ), Hanhang Yin, Yandong Chen, An Luo, Lerong Hong, Lingfeng Deng, Hanting Peng
College of Electrical and Information Engineering, Hunan University, Changsha 410082, China
Show Author Information

Abstract

Earlier works have reported some critical commutating voltage or commutation failure immunity index calculation methods for commutation failure (CF) mitigation capability evaluation of line-commutated-converter-based high-voltage direct-current. However, accuracy of earlier methods is limited since they only consider commutating voltage drop and DC current rise. Hence, a commutation failure fault level calculation method under three-phase-to-ground faults considering multi-factor influence is proposed in this paper. First, transient time-domain response of DC current after fault is gained and DC current harmonics are calculated by Fast Fourier Transform. Then, AC current harmonics are estimated based on the coupling relationship of DC current and AC current of the inverter. Furthermore, supply voltage-time area and zero-crossing considering the harmonic voltage are estimated. Then, dynamic interaction between AC and DC system caused by constant extinction angle controller is considered by the power flow equation. Finally, discrete commutation processes are constructed based on commutation voltage-time area rule to determine occurrence of CF under different fault levels. Calculation results of the tradition method and the proposed method are compared with simulation results based on PSCAD/EMTDC.

References

【1】
【1】
 
 
CSEE Journal of Power and Energy Systems
Pages 2480-2488

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhu R, Zhou X, Yin H, et al. Commutation Failure Fault Level Calculation Method Under Three-phase-to-ground Faults Considering Multi-factor Influence. CSEE Journal of Power and Energy Systems, 2026, 12(5): 2480-2488. https://doi.org/10.17775/CSEEJPES.2022.06630

12

Views

0

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 30 September 2022
Revised: 11 November 2022
Accepted: 28 November 2022
Published: 17 November 2023
© 2022 CSEE.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).