AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (2.3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese

Simulation analysis and experimental study on stiffness and fatigue life fluctuation of leaf spring rubber bearings

Na JI1, Juan LIU3, Haoran WANG3, Rui GAO3, Yonglai LU1,2, Fanzhu LI1,2( )
State Key Laboratory of Organic-Inorganic Composites,Beijing University of Chemical Technology,Beijing 100029,China
College of Materials Science and Engineering,Beijing University of Chemical Technology,Beijing 100029,China
China National Heavy Duty Truck Group Co.,Ltd.,Jinan 250031,China
Show Author Information

Abstract

The leaf spring rubber bearings are important load-bearing and vibration-absorbing components in heavy trucks and often suffer from short fatigue life and poor durability under cyclic loading conditions. This work took the leaf spring rubber bearing as the research object, calculated its vertical static stiffness, and compared it with the experimental stiffness. The reason why the experimental stiffness curve is folded was explained through bearing forces. Based on the critical plane method and fatigue crack propagation theory, the dynamic heat build-up and fatigue life of the leaf spring rubber bearing under a vertical compressive load of 260 kN were predicted by using a thermo-mechanical coupling analytical approach. The results show that the error between the simulated maximum temperature and the experimental temperature is around 5.0%, and the error between the predicted fatigue life and the mean value of the bench test is 7.5%. Based on the tensile fatigue test data of rubber specimens, a two-parameter Weibull distribution model for crack precursor size is fitted, and the initial size range of microcracks is inferred to be between 29.8 μm and 62.8 μm, with a median of 38.5 μm. The fatigue simulation life of the leaf spring rubber bearing calculated based on the distribution data of the crack precursor size ranges from 18 000 to 39 000 cycles, quantitatively explaining the fluctuation of the bench fatigue test life. This work can provide guidance for the optimal design of the fatigue life of vibration-absorbing rubber products.

CLC number: V255+.3;TQ333;TB39;TQ339;U467 Document code: A Article ID: 1001-5965(2025)05-1726-09

References

【1】
【1】
 
 
Journal of Beijing University of Aeronautics and Astronautics
Pages 1726-1734

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
JI N, LIU J, WANG H, et al. Simulation analysis and experimental study on stiffness and fatigue life fluctuation of leaf spring rubber bearings. Journal of Beijing University of Aeronautics and Astronautics, 2025, 51(5): 1726-1734. https://doi.org/10.13700/j.bh.1001-5965.2023.0263

929

Views

29

Downloads

0

Crossref

0

Scopus

0

CSCD

Received: 23 May 2023
Published: 21 July 2023
© Journal of Beijing University of Aeronautics and Astronautics