AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (2.5 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese

Multi-Factor Model of Plastic Development Coefficient and Strength Calculation for Rectangular Concrete-Filled Steel Tube Members Under Pure Bending

Mulin PANG1, Weiwei XIE2, Lufeng YANG1( )
School of Civil Engineering & Architecture/Key Laboratory of Disaster Prevention and Structural Safety of the Ministry of Education, Guangxi University, Nanning 530004, Guangxi, China
Guangxi Road & Bridge Engineering Group Co., Ltd., Nanning 530011, Guangxi, China
Show Author Information

Abstract

The constraint effect of rectangular steel pipe on core concrete has special characteristics, and the accurate prediction of the plastic development capacity of bending members can effectively ensure the load-bearing safety. In order to improve the calculation accuracy of the sectional strength of rectangular CFST members under pure bending, this study established a multi-factor model of plastic development coefficient and an improved bending strength model based on the confinement coefficient and further considering the influence of height-width ratio and steel ratio. First of all, based on the unified theory of CFST members, the change law of plastic development coefficient of rectangular concrete-filled steel tube was studied and compared with the current standard calculation formula. Then, combined with the specification and engineering needs, 2160 numerical simulation components of rectangular CFST members under pure bending were constructed and the refined analysis of the fiber model method was conducted using the improved constitutive relationship and component failure criterion. The influence of width-thickness ratio, height-width ratio, steel ratio and strength ratio on plasticity development coefficient was investigated to determine that the height-width ratio and steel ratio are the main factors influencing the plasticity development coefficient, and the function expressions related to the height-width ratio and steel ratio were fitted through regression analysis. Thus the multi-factor model of plasticity development coefficient and strength calculation of rectangular CFST members under pure bending were established. Finally, the bending strength improvement model was verified against the main design specifications at home and abroad by using the 128 sets of experimental data collected. The results show that the established multi-factor model of plasticity development coefficient overcomes the defects of the current specification that the calculation model is not accurate enough, and it can more accurately reflect the plasticity development capacity of rectangular CFST members under pure bending. The established improvement model of the bending strength of rectangular CFST members under pure bending solved for the ratio of the ultimate load carrying capacity to the experimental value has a mean value of 0.971 and a root-mean-square error of 0.118, indicating a good match and a higher calculation accuracy.

CLC number: TU398 Article ID: 1000-565X(2024)11-0021-11

References

【1】
【1】
 
 
Journal of South China University of Technology (Natural Science Edition)
Pages 21-31

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
PANG M, XIE W, YANG L. Multi-Factor Model of Plastic Development Coefficient and Strength Calculation for Rectangular Concrete-Filled Steel Tube Members Under Pure Bending. Journal of South China University of Technology (Natural Science Edition), 2024, 52(11): 21-31. https://doi.org/10.12141/j.issn.1000-565X.240059

614

Views

5

Downloads

0

Crossref

0

Web of Science

1

Scopus

0

CSCD

Received: 05 February 2024
Published: 25 November 2024
© Journal of South China University of Technology(Natural Science Edition)