AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (5.9 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research paper | Publishing Language: Chinese | Open Access

Effect of microstructural characteristics on thermomechanical properties of thermal barrier coatings

Ziyuan HUANG1,2, Duzhou CHEN1, Nan ZHANG1( ), Guangming XIAO2( ), Yanxia DU2
School of Mechanical Engineering,Southwest Jiaotong University,Chengdu 610031,China
State Key Laboratory of Aerodynamics,Mianyang 621000,Sichuan,China
Show Author Information

Abstract

Thermal barrier coatings (TBCs) play an important role in high-temperature protection, and their microstructural characteristics significantly influence thermal insulation performance and mechanical behavior. In this work, high-resolution X-ray computed tomography and three-dimensional reconstruction are used to construct a microstructural model of TBCs incorporating realistic pore distributions and rough interfaces. Comparative models with varying microstructural parameters are also developed. Coupled thermomechanical finite element analysis is performed to investigate the effects of interface morphology, porosity, and pore size on temperature and stress distributions. The results show that increasing interface roughness intensifies local stress concentrations and reduces the thermal insulation performance of the coating. Increasing porosity improves thermal insulation and reduces both the maximum and mean equivalent stresses. At a constant porosity, increasing pore size slightly improves thermal insulation while causing a small increase in equivalent stress. This work clarifies the effects of microstructural parameters on heat transfer and thermal stress distributions in TBCs, providing a theoretical basis for the quantitative optimization of TBC microstructures and guidance for improving their reliability in service.

CLC number: TK124;V254.2 Document code: A Article ID: 1005-5053(2026)11-0110-10

References

【1】
【1】
 
 
Journal of Aeronautical Materials
Pages 110-119

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
HUANG Z, CHEN D, ZHANG N, et al. Effect of microstructural characteristics on thermomechanical properties of thermal barrier coatings. Journal of Aeronautical Materials, 2026, 46(11): 110-119. https://doi.org/10.11868/j.issn.1005-5053.2025.000199

2

Views

0

Downloads

0

Crossref

0

Scopus

0

CSCD

Received: 22 October 2025
Accepted: 03 December 2025
Published: 15 November 2026
© Journal of Aeronautical Materials 2026.

This is an open access article under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).