AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (4.3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Review | Publishing Language: Chinese | Open Access

Research progress on hot cracking of solution-strengthened nickel-based superalloys fabricated by laser additive manufacturing

Ji LIU1, Yunlong ZHANG1( ), Liang CHENG1,2, Jie BAI3, Rui MA3, Yajun WANG3
Department of Materials Engineering,Jiangsu University of Technology,Changzhou 213001,Jiangsu,China
Chongqing Innovation Center,Northwestern Polytechnical University,Chongqing 401135,China
Beijing Power Machinery Institute,Beijing 100074,China
Show Author Information

Abstract

Laser additive manufacturing (LAM), with its advantages of high design and manufacturing freedom and good formability, is gradually replacing conventional manufacturing methods for the fabrication of complex metal components. However, the pronounced temperature gradients and extremely high cooling rates during the LAM process render the as-built parts susceptible to hot cracking. Taking solution-strengthened nickel-based superalloys widely used in aerospace, such as Hastelloy X and Inconel 625, as the research subjects, this paper introduces the typical crack types in the LAM of such alloys, elucidates the formation mechanisms and influencing factors of solidification cracks and liquation cracks from the perspectives of dendrite growth, elemental segregation, and residual stress, and systematically summarizes the research progress in crack suppression with respect to material composition optimization, nanoparticle modification, process parameter optimization, in-situ process monitoring, and post-processing adjustment. In view of the current limitations, such as time-consuming and labor-intensive trial-and-error process optimization, an incomplete understanding of cracking mechanisms, and crack characterization largely confined to two dimensions, future research directions are outlined, including developing crack-free alloy composition systems by integrating thermodynamic calculation, high-throughput experiments, and machine learning; establishing multi-signal in-situ monitoring combined with machine learning for crack prediction; and deepening crack characterization by means of three-dimensional X-ray tomography.

CLC number: V252 Document code: A Article ID: 1005-5053(2026)11-0014-14

References

【1】
【1】
 
 
Journal of Aeronautical Materials
Pages 14-27

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LIU J, ZHANG Y, CHENG L, et al. Research progress on hot cracking of solution-strengthened nickel-based superalloys fabricated by laser additive manufacturing. Journal of Aeronautical Materials, 2026, 46(11): 14-27. https://doi.org/10.11868/j.issn.1005-5053.2024.000180

1

Views

0

Downloads

0

Crossref

0

Scopus

0

CSCD

Received: 02 December 2024
Accepted: 27 February 2025
Published: 15 November 2026
© Journal of Aeronautical Materials 2026.

This is an open access article under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).