AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (9 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research paper | Publishing Language: Chinese | Open Access

Microstructure and mechanical properties of B4C/TC4 titanium matrix composites produced by laser directed energy deposition

Lihong JIANG1,2( ), Lianhai FAN1, Zheng LIU1, Qulong WEI1, Lin ZHU1
Jiangxi Key Laboratory of Extreme Manufacturing Technology for High-End Equipment,Nanchang Hangkong University,Nanchang 330063,China
State Key Laboratory Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China
Show Author Information

Abstract

B4C/TC4 titanium matrix composites are fabricated by laser-directed energy deposition(L-DED) to investigate the effect of B4C content on the microstructure and mechanical properties of the deposited layers. The results indicate that during the deposited process, B4C reacts in-situ with the TC4 matrix, generating TiC and TiB reinforcement phases. With the addition of B4C content, the hardness of the composites increases significantly, while the plasticity decreases accordingly. When the mass fraction of B4C is 0.2%, the precipitated phases of TiC and TiB exhibit the most uniform distribution. At this point, the composite achieves the highest strength while still maintaining good plasticity, demonstrating the optimal comprehensive mechanical properties. This performance optimization is mainly attributed to the synergistic effect of multiple strengthening mechanisms, including the load transfer effect of TiB phases with a high aspect ratio, the pinning effect of precipitated phases on grain boundaries and the resulting grain refinement.

CLC number: V257 Document code: A

References

【1】
【1】
 
 
Journal of Aeronautical Materials
Pages 109-117

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
JIANG L, FAN L, LIU Z, et al. Microstructure and mechanical properties of B4C/TC4 titanium matrix composites produced by laser directed energy deposition. Journal of Aeronautical Materials, 2025, 45(6): 109-117. https://doi.org/10.11868/j.issn.1005-5053.2024.000157

716

Views

8

Downloads

0

Crossref

0

Scopus

0

CSCD

Received: 10 October 2024
Published: 01 December 2025
© Journal of Aeronautical Materials 2025.

This is an open access article under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).