AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

A discussion of fatigue properties of notched specimens subjected to prestressing treatment machined from FGH4097

Rongxi SHIa, Dasheng WEIa,b, Le HANc, Shun YANGa( )
School of Energy and Power Engineering, Beihang University, Beijing 100191, China
Jiangxi Research Institute, Beihang University, Nanchang 330096, China
Research Institute of Aero-Engine, Beihang University, Beijing 100191, China
Show Author Information

Abstract

Experimental and numerical investigations were performed to reveal the effect of prestress on the fatigue properties of FGH4097 so as to quantitatively evaluate the overspeed benefit of the disc of aeroengine. A corresponding experiment was performed to examine the effect of prestress on the fatigue life of FGH97. A complete model describing the fatigue properties of the prestressed notch specimen was proposed. After the modification of mean stress, stress gradient and prestressing treatment, the model is finally verified by fatigue test of presstressed notch specimens machined from FGH4097 with satisfactory accuracy and good engineering applicability. The new model highlights that for the variable fatigue loads, the introduction of appropriate prestress is expected to benefit to the notch specimens and certainly to the disc of aeroengine regards of their fatigue properties. Both the calculation method of fatigue life parameters and the prestress correction model are proved to have good prediction accuracy.

Electronic Supplementary Material

Download File(s)
cja-37-4-508_ESM.pdf (95.1 KB)

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 508-523

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
SHI R, WEI D, HAN L, et al. A discussion of fatigue properties of notched specimens subjected to prestressing treatment machined from FGH4097. Chinese Journal of Aeronautics, 2024, 37(4): 508-523. https://doi.org/10.1016/j.cja.2024.01.016

929

Views

6

Crossref

5

Web of Science

5

Scopus

1

CSCD

Received: 27 February 2023
Revised: 12 May 2023
Accepted: 12 June 2023
Published: 19 January 2024
© 2023 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).