AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Design and analysis of a novel hybrid cooling method of high-speed high-power permanent magnet assisted synchronous reluctance starter/generator in aviation applications

Hong GUOa,b,c, Xu HEa,b, Jinquan XUa,b,c( ), Wei TIANd, Xiaofeng DINGa,b,c, Laicai JUe, Dehong LIf
School of Automation Science and Electrical Engineering, Beihang University, Beijing 100083, China
Science and Technology on Aircraft Control Laboratory, Beihang University, Beijing 100083, China
Ningbo Innovation Research Institute, Ningbo 315800, China
School of Electrical and Information Engineering, Jiangsu University, Zhenjiang 212013, China
Beijing Shuguang Aviation Electric Co. LTD, Beijing 101300, China
Aviation Industry Helicopter Design and Research Institute, Jingdezhen 333001, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

To improve the heat dissipation performance, this paper proposes a novel hybrid cooling method for high-speed high-power Permanent Magnet assisted Synchronous Reluctance Starter/Generator (PMaSynR S/G) in aerospace applications. The hybrid cooling structure with oil circulation in the housing, oil spray at winding ends and rotor end surface is firstly proposed for the PMaSynR S/G. Then the accurate loss calculation of the PMaSynR S/G is proposed, which includes air gap friction loss under oil spray cooling, copper loss, stator and rotor core loss, permanent magnet eddy current loss and bearing loss. The parameter sensitivity analysis of the hybrid cooling structure is proposed, while the equivalent thermal network model of the PMaSynR S/G is established considering the uneven spraying at the winding ends. Finally, the effectiveness of the proposed hybrid cooling method is demonstrated on a 40 kW/24000 r/min PMaSynR S/G experimental platform.

Electronic Supplementary Material

Download File(s)
cja-36-3-285_ESM.pdf (449.4 KB)

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 285-302

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
GUO H, HE X, XU J, et al. Design and analysis of a novel hybrid cooling method of high-speed high-power permanent magnet assisted synchronous reluctance starter/generator in aviation applications. Chinese Journal of Aeronautics, 2023, 36(3): 285-302. https://doi.org/10.1016/j.cja.2022.08.017

861

Views

16

Crossref

16

Web of Science

19

Scopus

4

CSCD

Received: 13 February 2022
Revised: 29 March 2022
Accepted: 10 June 2022
Published: 24 August 2022
© 2022 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).