AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (2.9 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Numerical evaluation of enhanced green infrastructures for mitigating urban heat in a desert urban setting

Afifa Mohammed1( )Ansar Khan2Mattheos Santamouris1
Faculty of Built Environment, University of New South Wales, Sydney, Australia
Department of Geography, Lalbaba College, University of Calcutta, Kolkata, India
Show Author Information

Abstract

The cities of desert climates are anticipated to recognize a synergy of urban heat island (UHI) and severe heat waves during summertime. To improve the urban thermal environment, the present study aims quantitatively explore a strategically designed network of vegetation patches called green infrastructure (GI) in subtropical desert cities such as Dubai. To achieve a more comfortable temperature environment, we built and simulated four GI situations with higher GI fractions, GI25, GI50, GI75, and GI100. Using a mesoscale urban model, the mosaic approach is utilized to test potential thermal improvement and urban climate impact, and a portion of each urban grid cell in the model domain is altered with various species of urban vegetation patches by 25%, 50%, 75%, and 100%. The daily peak reduction in ambient temperature at 17:00LT is similar to 0.0168 ℃ per unit of GI increase when compared to the untreated scenario; however, the maximum anticipated daytime summer temperature decline for GI25, GI50, GI75, and GI100 is 0.6 ℃, 1.1 ℃, 1.4 ℃, and 1.7 ℃, respectively. The associated reduction in nighttime ambient temperature per unit increase in the GI is 0.0432 ℃, with a maximum temperature drop of around 2.4 ℃ for the GI100 scenario. Increased GI reduces the height of the planetary boundary layer (PBL) by up to 468 m, which might lead to greater pollution concentrations. While GI-based cooling has a significant influence on delayed sea breeze and humidity, it may raise the risk of heat discomfort in the indoor building environment. This study adds to our understanding of the potential for GI mitigation as well as the seasonal impact of developing GIs on the desert urban boundary layer.

Graphical Abstract

References

【1】
【1】
 
 
Building Simulation
Pages 1691-1712

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Mohammed A, Khan A, Santamouris M. Numerical evaluation of enhanced green infrastructures for mitigating urban heat in a desert urban setting. Building Simulation, 2023, 16(9): 1691-1712. https://doi.org/10.1007/s12273-022-0940-x

1315

Views

98

Downloads

31

Crossref

35

Web of Science

36

Scopus

0

CSCD

Received: 03 July 2022
Revised: 15 August 2022
Accepted: 07 September 2022
Published: 10 October 2022
© The Author(s) 2022

This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/