AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.1 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Occupant behavior in identical residential buildings: A case study for occupancy profiles extraction and application to building performance simulation

Antonio Muroni1,2Isabella Gaetani1,3( )Pieter-Jan Hoes1Jan L. M. Hensen1
Building Physics and Services, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands
Enel S.p.A., Viale Regina Margherita, 137, 00198 Rome, Italy
Arup, 13 Fitzroy St, Bloomsbury, W1T 4BQ London, UK
Show Author Information

Abstract

This study employs a simplified Knowledge Discovery in Database (KDD) to extract occupancy, equipment and light use profiles from a database referred to 12 all-electric prefabricated dwellings in the Netherlands. The profiles are then integrated into a building performance simulation (BPS) model using the software TRNSYS v17. The significance of the extracted profiles is verified by comparing the total and end-use yearly electricity consumption of the investigated dwellings as predicted by the simulation tool with on-site measurements. For the considered dwellings, using standard OB modeling results in an underestimation of the energy use intensity (EUI) by 5.9% to 42.5%, depending on the case. The integration of the occupant behavior (OB) profiles improves the total electricity consumption prediction from an initial 22.9% average deviation from measurements to 1.7%. The results corroborate that the 1.6x discrepancy observed in the buildings’ energy use intensity could be entirely ascribed to OB. Then, the knowledge extracted from the households’ database is used to propose a local electricity market framework to reduce the electricity bill and grid dependency of all households. This study confirms the need for appropriate OB modeling in BPS, it shows the potential of the KDD method for successful OB profiles extraction, and is a first example of data-mined OB profiles integration in BPS, as well as of OB profiles deployment for a practical application other than energy use prediction.

References

【1】
【1】
 
 
Building Simulation
Pages 1047-1061

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Muroni A, Gaetani I, Hoes P-J, et al. Occupant behavior in identical residential buildings: A case study for occupancy profiles extraction and application to building performance simulation. Building Simulation, 2019, 12(6): 1047-1061. https://doi.org/10.1007/s12273-019-0573-x

905

Views

69

Downloads

49

Crossref

N/A

Web of Science

49

Scopus

0

CSCD

Received: 18 March 2019
Revised: 28 July 2019
Accepted: 29 July 2019
Published: 27 August 2019
© The Author(s) 2019

This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.