AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (4.3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese

Three-dimensional thermoacoustic instability analysis in a multi-nozzle combustor

Yisha HUANG1, Xiaoyu WANG1, Lei QIN2( ), Guangyu ZHANG1, Ronghui CHENG3, Xiaofeng SUN1,2
Research Institute of Aero-Engine, Beihang University, Beijing 100191, China
School of Energy and Power Engineering, Beihang University, Beijing 100191, China
AECC Shenyang Engine Research Institute, Shenyang 110015, China
Show Author Information

Abstract

Thermoacoustic instability poses a significant challenge to the operational safety and stability of multi-nozzle combustors in both aero-engines and industrial gas turbines. To achieve a comprehensive understanding and effective control of this phenomenon, this paper employs a three-dimensional Green's function method to characterize the geometric and thermal response differences among multiple nozzles, aiming to reveal the key parameters influencing three-dimensional thermoacoustic instability and the control effects of combining different types of nozzles. The study focuses on analyzing the impact of the average temperature of the combustion chamber, axial length of nozzles, and inlet boundary conditions of nozzles on the azimuthal, radial, and axial modal thermoacoustic instability. The results indicate that when the axial length of nozzles approximates an odd multiple of a quarter wavelength, the thermoacoustic instability evolves gradually; in contrast, when the length approaches an integer multiple of a half wavelength, an abrupt shift in the instability state occurs. Moreover, the inlet boundary conditions of nozzles affect the stability of thermoacoustic modes by altering the acoustic energy dissipation at the inlet and the phase difference between sound pressure and unsteady heat release rate. By leveraging the identified patterns of key parameters, adjusting the geometric structure and heat source response of some nozzles can effectively control three-dimensional unstable modes. Moreover, coordinated adjustments of multiple parameters can significantly enhance the control of first-order axial mode thermoacoustic instability across a broader parameter spectrum.

CLC number: V231 Document code: A Article ID: 1000-6893(2025)18-131843-16

References

【1】
【1】
 
 
Acta Aeronautica et Astronautica Sinica

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
HUANG Y, WANG X, QIN L, et al. Three-dimensional thermoacoustic instability analysis in a multi-nozzle combustor. Acta Aeronautica et Astronautica Sinica, 2025, 46(18). https://doi.org/10.7527/S1000-6893.2025.31843

791

Views

6

Downloads

0

Crossref

0

Scopus

0

CSCD

Received: 26 January 2025
Revised: 24 February 2025
Accepted: 02 April 2025
Published: 17 April 2025
© 2025 The Journal of Acta Aeronautica et Astronautica Sinica