AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (11.7 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese

Review on rotary ultrasonic machining of carbon fiber composites

Jing SHU, Wenhe LIAO( ), Kan ZHENG, Song DONG, Lianjun SUN
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
Show Author Information

Abstract

Carbon fiber composites have been widely used in various extreme service environments and the proportion and importance have increased due to their excellent properties such as lightweight, high temperature and corrosion resistance. Due to size and assembly requirements, subsequent machining of composites is required. Rotary ultrasonic machining technology has significant advantages in improving the removal efficiency of carbon fiber composites, reducing cutting force and improving machining quality, making it a research hotspot in field of difficult-to-machine materials manufacturing. In recent years, domestic and foreign scholars have carried out considerable research work and achieved fruitful results in rotary ultrasonic drilling, milling and grinding. However, there are significant differences in the influence mechanism of various ultrasonic vibration forms intake on the cutting effect of carbon fiber composites under different machining methods and the coupling process with the cutting energy field. Moreover, there is still considerable room for improvement in both the depth and breadth of research on the surface integrity and service performance of various carbon fiber composites. Therefore, this paper summarizes and condenses the domestic and foreign literatures on material removal mechanism, machining characteristic, surface quality research and practical engineering application, and predicts the development trend of rotary ultrasonic machining of carbon fiber composites.

CLC number: V261; TB559; TG663 Document code: A

References

【1】
【1】
 
 
Acta Aeronautica et Astronautica Sinica
Article number: 628939

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
SHU J, LIAO W, ZHENG K, et al. Review on rotary ultrasonic machining of carbon fiber composites. Acta Aeronautica et Astronautica Sinica, 2024, 45(13): 628939. https://doi.org/10.7527/S1000-6893.2023.28939

1534

Views

49

Downloads

0

Crossref

9

Scopus

2

CSCD

Received: 26 April 2023
Revised: 30 May 2023
Accepted: 29 December 2023
Published: 26 February 2024
© 2024 The Journal of Acta Aeronautica et Astronautica Sinica