Printability and Applicability of 3D Printing System Loaded with Chlorogenic Acid Hydrogel

Three-dimensional food printing (3DFP) is an efficient way of food processing in line with the future lifestyle. As a delivery system, hydrogel has become a research hotspot because of its remarkable characteristics such as directed delivery. The purpose of this study was to explore the effects of 3DFP on the structure, physical properties and functions of hydrogels containing methylcellulose (MC), chlorogenic acid (CA) and hyaluronic acid (HA) for the purpose of revealing the printability and applicability of hydrogels in 3DFP processing. Texture properties, rheological properties, microstructure, embedding rate and digestive properties of the 3D printed products were measured. The results showed that the best CA-loaded hydrogel system for 3DFP processing consisted of MC, HA and CA at a mass ratio of 8:0.5:0.5. Its printed product showed the smallest width deviation (13.40%), the highest hardness, the maximum elasticity, and the minimum adhesiveness, had compact structure and uniform porosity, was not easy to collapse, and had good supportability and the best printing moldability. 3DFP well optimized the physical structure of hydrogel without changing its chemical properties. The embedding rate of CA was 22.09 percentage points higher than that before 3D printing. In simulated gastrointestinal digestion test, the release rate of CA from the printed product was significantly higher than that of the unprinted samples, showing a good sustained release effect, and the in vitro release of CA was fitted to the Ritger-Peppas model. These results showed that the hydrogel system had good printability and applicability, and 3DFP could significantly improve the targeted release of CA loaded in hydrogel.