AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (24 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

Effect of MnO/PP separator on morphologies of Li metal deposition

Jun YAN1,2( )
Publishing Center, North University of China, Taiyuan 030051, China
Beijing Key Laboratory of Energy Conversion and Storage Materials, College of Chemistry, Beijing Normal University, Beijing 100875, China
Show Author Information

Abstract

The application of lithium metal anodes is hindered by low Coulombic efficiency (CE), serious lithium dendrites and volume expansion. An MnO/Polypropylene (PP) composite separator was developed to regulate lithium metal deposition behaviors through in situ forming stable artificial solid electrolyte interface (SEI) passivating layers. The concentration of MnO in the cells can be maintained at a constant based on quite low solubility of MnO in the liquid electrolyte, and the dissolved MnO can be reduced to produce Li2O and Mn metal nanoparticles, which can not only function as nucleating seeds of lithium metal deposits but also repair the broken SEI layer. Dendritic-free Li deposits can be obtained by simple separator coating. It can also improve the electrochemical performance of lithium metal batteries. And it is benefit for applications of Li metal anodes.

References

【1】
【1】
 
 
Journal of Measurement Science and Instrumentation
Pages 154-160

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
YAN J. Effect of MnO/PP separator on morphologies of Li metal deposition. Journal of Measurement Science and Instrumentation, 2025, 16(1): 154-160. https://doi.org/10.62756/jmsi.1674-8042.2025015

613

Views

76

Downloads

0

Crossref

0

CSCD

Received: 27 August 2023
Revised: 14 November 2023
Accepted: 28 November 2023
Published: 01 March 2025
© The Author(s) 2025.

The articles published in this open access journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, distribution and reproduction in any medium, provided the original work is properly cited.