AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (12.7 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

Galloping characteristics of catenary positive feeder considering aerodynamic damping

Yanzhe LI1Xianglong JIN1Shanpeng ZHAO1( )Youpeng ZHANG1Sihua WANG1Wanrun LI2
School of Automatic and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
Electronic Technology Research Institute of Gansu Changfeng Elctronics Technology Co., Ltd., Lanzhou 730070, China
Show Author Information

Abstract

The purpose of this study is to analyze the galloping characteristics of the catenary positive feeder in fluctuating wind areas considering dynamic-wind angle of attack and aerodynamic damping. Firstly, the flow field model of the catenary positive feeder was established, the fluctuating wind field was simulated by Davenport wind power spectrum and linear filtering method, and the wind speed at inlet in calculation domain was controlled by editing the profile file to simulate and calculate the aerodynamic characteristics of the positive feeder in the fluctuating wind area. Then, taking the positive feeder as the research object, the mathematical model of actual structure and the corresponding finite element model were established. By applying the wind load to the finite element model, the influence of aerodynamic damping caused by the self-movement of the positive feeder on the galloping response was analyzed, and the frequency domain characteristics of galloping displacement of the positive feeder considering aerodynamic damping were studied. Finally, the calculation method of aerodynamic damping by the Guidelines for Electrical Transmission Line Structural Loading (ASCE No.74) was used for the galloping response of the positive feeder and compared with the proposed method. The results show that when considering aerodynamic damping, the galloping amplitude of the positive feeder decreases significantly, and the first-order resonance effect on the vertical displacement and horizontal displacement decreases significantly. The galloping trajectories calculated by the two methods are consistent. Therefore, this study is of great significance to further clarify the ice-free galloping mechanism of the catenary positive feeder in violent wind areas.

References

【1】
【1】
 
 
Journal of Measurement Science and Instrumentation
Pages 142-153

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LI Y, JIN X, ZHAO S, et al. Galloping characteristics of catenary positive feeder considering aerodynamic damping. Journal of Measurement Science and Instrumentation, 2025, 16(1): 142-153. https://doi.org/10.62756/jmsi.1674-8042.2025014

452

Views

68

Downloads

0

Crossref

0

CSCD

Received: 18 October 2023
Revised: 20 January 2024
Accepted: 24 January 2024
Published: 01 March 2025
© The Author(s) 2025.

The articles published in this open access journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, distribution and reproduction in any medium, provided the original work is properly cited.