AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.8 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

Adaptive compensation method for photomultiplier tube counting temperature drift

Gang LIYaoqi WANG( )Xiaopeng WANG
School of Electronic and Information Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
Show Author Information

Abstract

The photomultiplier tube (PMT) is an important device for micro-light detection, and the detection of light intensity using photon counting method can significantly reduce the interference of noise, but the sensitivity, gain, and dark noise of PMT cathode are easily affected by the ambient temperature, which leads to the instability of the output pulse amplitude and affects the detection performance of the system for micro-light. A high voltage gain compensation and threshold correction system was designed for PMT through microcontroller unit (MCU), digital to analog converter (DAC), and other modules. A hybrid function model of temperature and high voltage compensation increment

References

【1】
【1】
 
 
Journal of Measurement Science and Instrumentation
Pages 244-252

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LI G, WANG Y, WANG X. Adaptive compensation method for photomultiplier tube counting temperature drift. Journal of Measurement Science and Instrumentation, 2024, 15(2): 244-252. https://doi.org/10.62756/jmsi.1674-8042.2024025

1461

Views

132

Downloads

0

Crossref

0

CSCD

Received: 11 October 2023
Revised: 04 December 2023
Accepted: 17 January 2024
Published: 01 June 2024
© The Author(s) 2024.

The articles published in this open access journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, distribution and reproduction in any medium, provided the original work is properly cited.