AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (10.7 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

A novel aeroengine remaining useful life prediction method considering degradation starting point

Shiwei SUOYue WANG( )Lin LINSong FUYifan LU( )
School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China
Show Author Information

Abstract

The degradation of aeroengines can be divided into two stages: the healthy stage and the unhealthy stage. Remain useful life (RUL) prediction should be triggered from the start time of the unhealthy stage to ensure safe operation. Nevertheless, many existing RUL prediction methods simply assign a fixed DSP to any aeroengine, limiting further improvement as the DSP is uncertain and varies with individual differences of aeroengines. To address this issue, a novel two-stage deep residual long-short term memory (Dual-DRLSTM) is developed, which integrates DSP detection and RUL prediction into one framework, and associates them through degradation health index (HI). First, DRLSTM is employed as the backbone to extract representative degradation features from multi-dimensional time-series monitoring data. Second, the Dual-DRLSTM relaxes the strong assumption of the fixed degradation start point (DSP) and performs DSP detection for each aeroengine. Then, the Dual-DRLSTM predicts the RUL of the aeroengine beyond the DSP in the unhealthy stage. Finally, the outstanding performance of Dual-DRLSTM is validated through a series of experiments on a public C-MAPSS dataset.

References

【1】
【1】
 
 
Journal of Advanced Manufacturing Science and Technology
Article number: 2025002

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
SUO S, WANG Y, LIN L, et al. A novel aeroengine remaining useful life prediction method considering degradation starting point. Journal of Advanced Manufacturing Science and Technology, 2025, 5(1): 2025002. https://doi.org/10.51393/j.jamst.2025002

1381

Views

39

Downloads

2

Crossref

2

Scopus

Received: 01 April 2024
Revised: 16 April 2024
Accepted: 20 May 2024
Published: 03 June 2024
© 2025 JAMST

This is an Open Access article distributed under the terms of the Creative Commons Attribution License http://creativecommons.org/licenses/by/4.0),which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.