AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Home Capillarity Article
PDF (690.9 KB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Perspective | Open Access

Capillarity by design: Programming phase connectivity in electrochemical devices

Department of Civil Engineering, McMaster University, Hamilton L8S 4L8, Canada
Show Author Information

Abstract

Electrochemical devices are commonly optimized through catalyst activity, membrane properties, and charge transport, yet many practical losses originate from the organization and dynamics of gas and liquid phases within porous electrodes. Capillarity and wettability govern which phase invades a pore, whether wetting films remain connected, where bubbles nucleate, and how rapidly reactive interfaces are renewed. This perspective examines these mechanisms across polymer-electrolyte fuel cells, water electrolyzers, and carbon-dioxide electrolyzers. Its central argument is that performance depends less on the total amount of gas or liquid present than on the connectivity of each phase, the residence time of interfaces at reactive sites, and the evolution of these configurations under operating conditions. Recent studies further show that electrogenerated bubbles are not uniformly detrimental: persistent bubbles can block active area and impede ionic transport, whereas controlled nucleation, growth, and detachment can enhance mixing and product removal. These observations motivate a shift from uniform surface treatments toward multiscale capillary architectures that spatially program wettability, catalyst placement, and connected transport pathways to organize multiphase flow deliberately.

References

【1】
【1】
 
 
Capillarity
Pages 29-33

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhao B. Capillarity by design: Programming phase connectivity in electrochemical devices. Capillarity, 2026, 20(2): 29-33. https://doi.org/10.46690/capi.2026.08.01

4

Views

0

Downloads

0

Crossref

0

Scopus

Received: 18 June 2026
Revised: 11 July 2026
Accepted: 20 July 2026
Published: 22 July 2026
© The Author(s) 2026.

This article is distributed under the terms and conditions of the Creative Commons Attribution (CC BY-NC-ND) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.