AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.7 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Invited Review | Open Access

Integrated wellbore thermal management for deep wellbore cooling: Recent advances, critical challenges, and future perspectives

Shandong Key Laboratory of Oil and Gas Field Chemistry, School of Petroleum Engineering, China University of Petroleum (East China), Qingdao 266580, P. R. China
State Key Laboratory of Deep Oil and Gas, China University of Petroleum (East China), Qingdao 266580, P. R. China
School of Energy Resources, China University of Geosciences (Beijing), Beijing 100083, P. R. China
School of Petroleum and Natural Gas Engineering, Changzhou University, Changzhou 213164, P. R. China
CNPC Engineering Technology R&D Company Limited, Beijing 102206, P. R. China
Department of Petroleum Engineering, NED University of Engineering & Technology, University Road, Karachi 75270, Pakistan
Show Author Information

Abstract

Wellbore temperature is a critical factor influencing drilling-fluid performance, downhole tool reliability, and operational safety in deep and ultra-deep drilling. Effective wellbore cooling has therefore become increasingly important for maintaining drilling efficiency and enabling safe operations under high-temperature conditions. This review summarizes recent advances in integrated wellbore thermal management across four interconnected areas, i.e., thermal modelling and prediction, functional thermal-management materials, cooling technologies and equipment, and real-time temperature monitoring and updating. First, the evolution of wellbore thermal modelling from steady-state analyses toward transient, fully coupled, and data-driven predictive frameworks is overviewed. Second, the functional thermal-management materials, especially microencapsulated phase-change materials, porous microspheres, and thermal-conductivity enhancers are examined. Third, cooling technologies and equipment, including surface cooling systems, low-thermal-conductivity drill pipes, downhole insulation chambers, and active refrigeration tools, are assessed. Fourth, real-time downhole temperature monitoring and model updating are reviewed based on fiber-optic sensing, probabilistic data assimilation, and intelligent model correction techniques for adaptive thermal management. Finally, the key challenges and future perspectives, including near-, medium-, and long-term priorities, are discussed.

Electronic Supplementary Material

Download File(s)
ager-21-3-247_ESM1.docx (253.1 KB)
ager-21-3-247_ESM2.pdf (316.7 KB)

References

【1】
【1】
 
 
Advances in Geo-Energy Research
Pages 247-268

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Li M-C, Ding Y, Xu Z, et al. Integrated wellbore thermal management for deep wellbore cooling: Recent advances, critical challenges, and future perspectives. Advances in Geo-Energy Research, 2026, 21(3): 247-268. https://doi.org/10.46690/ager.2026.09.05

12

Views

2

Downloads

0

Crossref

0

Web of Science

0

Scopus

Received: 06 July 2026
Revised: 02 August 2026
Accepted: 15 August 2026
Published: 19 August 2026
© The Author(s) 2026.

This article is distributed under the terms and conditions of the Creative Commons Attribution (CC BY-NC-ND) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.