Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
Search articles, authors, keywords, DOI, etc.
In deep tunneling engineering, the stability assessment and rock mass classification of the surrounding rock heavily depend on the precise acquisition of the physical and mechanical parameters and the basic quality index. However, traditional static investigation methods struggle to capture the real-time dynamic evolution of rock mass damage and the spatial heterogeneity of mechanical property degradation during excavation. To address this gap, this study uses microseismic time-lapse double-difference tomography to propose a comprehensive dynamic analysis method for evaluating the physical and mechanical parameters and the basic quality index of the tunnel surrounding rock. The results indicate that this method clearly identifies low-velocity damage zones within the surrounding rock in real time. Coupled with established relationship models correlating wave velocity with the rock properties, this approach dynamically and precisely delineates rock mass degradation zones and provides quality classifications of the surrounding rock. Influenced by excavation unloading and support installation, the surrounding rock wave velocities at different monitoring sections exhibit a distinct evolution pattern of initial steady state, unloading-induced degradation, and secondary compaction-induced recovery, accompanied by significant asymmetric spatial variations. The derived physical and mechanical parameters and the basic quality index demonstrate spatiotemporal evolution trends that are highly consistent with the wave velocity field variation. This study provides a scientific foundation and a reliable physical basis for the real-time adjustment of tunnel support designs and the early warning of instability under deep and complex geological conditions.
This article is distributed under the terms and conditions of the Creative Commons Attribution (CC BY-NC-ND) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Comments on this article