AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (7 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Original Article | Open Access

Dynamic evaluation of mechanical parameters and basic quality index for tunnel surrounding rock using microseismic time-lapse tomography

State Key Laboratory of Mountain Bridge and Tunnel Engineering, College of Civil Engineering, Chongqing Jiaotong University, Chongqing 400074, P. R. China
State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing 400044, P. R. China
Chongqing Fengjian Expressway Co., Ltd., Chongqing 404699, P. R. China
The National Institute of Mining-Metallurgy Science and Technology, Hanoi 11511, Vietnam
Show Author Information

Abstract

In deep tunneling engineering, the stability assessment and rock mass classification of the surrounding rock heavily depend on the precise acquisition of the physical and mechanical parameters and the basic quality index. However, traditional static investigation methods struggle to capture the real-time dynamic evolution of rock mass damage and the spatial heterogeneity of mechanical property degradation during excavation. To address this gap, this study uses microseismic time-lapse double-difference tomography to propose a comprehensive dynamic analysis method for evaluating the physical and mechanical parameters and the basic quality index of the tunnel surrounding rock. The results indicate that this method clearly identifies low-velocity damage zones within the surrounding rock in real time. Coupled with established relationship models correlating wave velocity with the rock properties, this approach dynamically and precisely delineates rock mass degradation zones and provides quality classifications of the surrounding rock. Influenced by excavation unloading and support installation, the surrounding rock wave velocities at different monitoring sections exhibit a distinct evolution pattern of initial steady state, unloading-induced degradation, and secondary compaction-induced recovery, accompanied by significant asymmetric spatial variations. The derived physical and mechanical parameters and the basic quality index demonstrate spatiotemporal evolution trends that are highly consistent with the wave velocity field variation. This study provides a scientific foundation and a reliable physical basis for the real-time adjustment of tunnel support designs and the early warning of instability under deep and complex geological conditions.

References

【1】
【1】
 
 
Advances in Geo-Energy Research
Pages 167-184

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Yang H, Yang L, Li Y, et al. Dynamic evaluation of mechanical parameters and basic quality index for tunnel surrounding rock using microseismic time-lapse tomography. Advances in Geo-Energy Research, 2026, 21(2): 167-184. https://doi.org/10.46690/ager.2026.08.07

4

Views

0

Downloads

0

Crossref

0

Web of Science

0

Scopus

Received: 01 June 2026
Revised: 06 July 2026
Accepted: 19 July 2026
Published: 22 July 2026
© The Author(s) 2026.

This article is distributed under the terms and conditions of the Creative Commons Attribution (CC BY-NC-ND) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.