AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.1 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Original Article | Open Access

Design of passive insulation system and optimization of thermal insulation material for deep in-situ condition-preserved coring

College of Polymer Science and Engineering, Sichuan University, Chengdu 610065, P. R. China
State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering, Sichuan University, Chengdu 610065, P. R. China
Institute of Deep Earth Sciences and Green Energy, College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, P. R. China
School of Mechanical Engineering, Sichuan University, Chengdu 610065, P. R. China
College of Water Resource & Hydropower, Sichuan University, Chengdu 610065, P. R. China
Show Author Information

Abstract

In order to help establish a new theory of deep rock mechanics and better guide the development of deep engineering, it is crucial to develop a deep in-situ condition-preserved coring device capable of obtaining cores while maintaining their original in-situ temperature and pressure conditions. To achieve insulation functionality within a compact design, a passive insulation system must be developed for such coring devices. Considering the size constraints and thermal insulation requirements, a passive thermal insulation system combining a vacuum layer and an insulating material layer has been designed in this work. Epoxy resin was selected as the insulation material due to its high compressive strength and low thermal conductivity. The type and dosage of curing agents, as well as the curing process with epoxy resin, were optimized. The ideal resin achieved a compressive strength of 241.03 MPa and a thermal conductivity as low as 0.25 W/m·K. Additionally, it exhibited excellent thermal stability and a high decomposition temperature. Under high-temperature and high-pressure water conditions simulating deep-earth environments, the epoxy resin’s maximum water absorption was below 0.7%. The insulation layer could effectively minimize heat exchange between the core and the external environment by up to 19.01%. These findings provide a significant contribution to the advancement of passive insulation systems for deep in-situ core drilling operations.

References

【1】
【1】
 
 
Advances in Geo-Energy Research
Pages 99-111

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Yang J, Bai H, He Z, et al. Design of passive insulation system and optimization of thermal insulation material for deep in-situ condition-preserved coring. Advances in Geo-Energy Research, 2025, 15(2): 99-111. https://doi.org/10.46690/ager.2025.02.03

1070

Views

101

Downloads

3

Crossref

3

Web of Science

3

Scopus

Received: 06 November 2024
Revised: 01 December 2024
Accepted: 25 December 2024
Published: 29 December 2024
© The Author(s) 2024.

This article is distributed under the terms and conditions of the Creative Commons Attribution (CC BY-NC-ND) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.