The load-bearing of composite slabs with steel deck under natural fires

Composite slabs with steel deck combine the load-bearing resistance of the steel deck and rebar with the compressive resistance of the concrete (components). Unprotected composite slabs may be exposed to natural fire conditions from below, and steel reduces its load-bearing capacity during the heating stage. In short fire events, with limited deformations, the composite slabs can recover the load-bearing capacity during the cooling stage. This research presents the validation of the numerical model and the development of a parametric study, to evaluate the load-bearing capacity during the fire event. This method includes a time step procedure, based on the average temperature calculation for each component, including the reduction coefficients applied to the design strength of each material. A new proposal is also presented to evaluate the residual load-bearing capacity. In some circumstances, the residual load-bearing can be reduced by more than 20%. The results showed that the highest variation in the load-bearing resistance of composite slabs occurs when the steel temperatures are between 20 and 600 ℃, after this temperature, the steel has already lost most of its mechanical strength. Moreover, it was observed that different heating rates and different cooling rates influence the rate of the reduction and recovery of the load-bearing capacity. It was also noticed that the lowest load-bearing capacity of the composite slabs was reached after the end of the heating phase, showing that the stability of the element during the heating phase does not guarantee fire safety during the cooling phase.