AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (20.8 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Model-Based Control of a Continuum Manipulator with Online Jacobian Error Compensation Using Kalman Filtering

Yujia Zhai1, Jihao Xu1, Hangjie Mo2, Chunqi Zhang1, Dong Sun1 ( )
Department of Biomedical Engineering, City University of Hong Kong, Hong Kong SAR, China
School of Management, Hefei University of Technology, Hefei 230009, China
Show Author Information

Abstract

Flexible continuum robots exhibit excellent adaptability to a wide range of tasks and environments. However, accurate and efficient modeling and control remain challenging due to their inherent nonlinearities. In this article, a hybrid model-based and online data-driven control method is proposed for a tendon-driven continuum robot, which requires no prior dataset collection or training. The method incorporates the Jacobian derived from the piecewise constant curvature model with online Jacobian error compensation using a Kalman filter. Consecutive Jacobian estimates are constrained to reduce fluctuations and improve stability in real-time estimation. Experimental results validate the effectiveness of the proposed hybrid approach in enhancing tracking accuracy and demonstrate its robustness against external disturbances.

References

【1】
【1】
 
 
Cyborg and Bionic Systems
Article number: 0339

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhai Y, Xu J, Mo H, et al. Model-Based Control of a Continuum Manipulator with Online Jacobian Error Compensation Using Kalman Filtering. Cyborg and Bionic Systems, 2025, 6: 0339. https://doi.org/10.34133/cbsystems.0339

757

Views

20

Downloads

17

Crossref

17

Web of Science

18

Scopus

Received: 25 February 2025
Revised: 12 May 2025
Accepted: 18 June 2025
Published: 07 August 2025
© 2025 Yujia Zhai et al. Exclusive licensee Beijing Institute of Technology Press. No claim to original U.S. Government Works.

Distributed under a Creative Commons Attribution License (CC BY 4.0).