References(38)
[1]
A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells, J. Am. Chem. Soc., vol. 131, no. 17, pp. 6050-6051, 2009.
[3]
J. Ma, X. Guo, L. Zhou, Z. H. Lin, C. F. Zhang, Z. Yang, G. Lu, J. J. Chang, and Y. Hao, Enhanced planar perovskite solar cell performance via contact passivation of TiO2/perovskite interface with NaCl doping approach, ACS Appl. Energy Mater., vol. 1, no. 8, pp. 3826-3834, 2018.
[4]
J. J. Chang, H. Zhu, B. C. Li, F. H. Isikgor, Y. Hao, Q. H. Xu, and J. Y. Ouyang, Boosting the performance of planar heterojunction perovskite solar cell by controlling the precursor purity of perovskite materials, J. Mater. Chem. A, vol. 4, no. 3, pp. 887-893, 2016.
[5]
L. Zhou, J. J. Chang, Z. Y. Liu, X. Sun, Z. H. Lin, D. Z. Chen, C. F. Zhang, J. C. Zhang, and Y. Hao, Enhanced planar perovskite solar cell efficiency and stability using a perovskite/PCBM heterojunction formed in one step, Nanoscale, vol. 10, no. 6, pp. 3053-3059, 2018.
[6]
Q. F. Dong, Y. J. Fang, Y. C. Shao, P. Mulligan, J. Qiu, L. Cao, and J. S. Huang, Electron-hole diffusion lengths >175μm in solution-grown CH3NH3PbI3 single crystals, Science, vol. 347, no. 6225, pp. 967-970, 2015.
[7]
D. Shi, V. Adinolfi, R. Comin, M. J. Yuan, E. Alarousu, A. Buin, Y. Chen, S. Hoogland, A. Rothenberger, K. Katsiev, et al., Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals, Science, vol. 347, no. 6221, pp. 519-522, 2015.
[8]
G. C. Xing, N. Mathews, S. Y. Sun, S. S. Lim, Y. M. Lam, M. Grätzel, S. Mhaisalkar, and T. C. Sum, Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI3, Science, vol. 342, no. 6156, pp. 344-347, 2013.
[9]
T. Zhang, J. Wu, P. Zhang, W. Ahmad, Y. F. Wang, M. Alqahtani, H. Chen, C. M. Gao, Z. D. Chen, Z. M. Wang, et al., High speed and stable solution-processed triple cation perovskite photodetectors, Adv. Opt. Mater., vol. 6, no. 13, p. 1701341, 2018.
[10]
H. R. Tan, A. Jain, O. Voznyy, X. Z. Lan, F. P. G. de Arquer, J. Z. Fan, R. Quintero-Bermudez, M. J. Yuan, B. Zhang, Y. C. Zhao, et al., Efficient and stable solution-processed planar perovskite solar cells via contact passivation, Science, vol. 355, no. 6326, pp. 722-726, 2017.
[11]
E. H. Jung, N. J. Jeon, E. Y. Park, C. S. Moon, T. J. Shin, T. Y. Yang, J. H. Noh, and J. Seo, Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene), Nature, vol. 567, no. 7749, pp. 511-515, 2019.
[12]
Q. Jiang, Y. Zhao, X. W. Zhang, X. L. Yang, Y. Chen, Z. M. Chu, Q. F. Ye, X. X. Li, Z. G. Yin, and J. B. You, Surface passivation of perovskite film for efficient solar cells, Nat. Photon., vol. 13, no. 7, pp. 460-466, 2019.
[13]
H. P. Dong, X. D. Guo, W. Z. Li, and L. D. Wang, Cesium carbonate as a surface modification material for organic-inorganic hybrid perovskite solar cells with enhanced performance, RSC Adv., vol. 4, no. 104, pp. 60131-60134, 2014.
[14]
P. Qin, A. L. Domanski, A. K. Chandiran, R. Berger, H. J. Butt, M. I. Dar, T. Moehl, N. Tetreault, P. Gao, S. Ahmad, et al., Yttrium-substituted nanocrystalline TiO2 photoanodes for perovskite based heterojunction solar cells, Nanoscale, vol. 6, no. 3, pp. 1508-1514, 2014.
[15]
J. Wang, M. C. Qin, H. Tao, W. J. Ke, Z. Chen, J. W. Wan, P. L. Qin, L. B. Xiong, H. W. Lei, H. Q. Yue, et al., Performance enhancement of perovskite solar cells with Mg-doped TiO2 compact film as the hole-blocking layer, Appl. Phys. Lett., vol. 106, no. 12, p. 121104, 2015.
[16]
Y. H. Lv, B. Cai, Q. S. Ma, Z. H. Wang, J. Y. Liu, and W. H. Zhang, Highly crystalline Nb-doped TiO2 nanospindles as superior electron transporting materials for high-performance planar structured perovskite solar cells, RSC Adv., vol. 8, no. 37, pp. 20982-20989, 2018.
[17]
Z. Z. Xu, X. Yin, Y. J. Guo, Y. Pu, and M. He, Ru-Doping in TiO2 electron transport layers of planar heterojunction perovskite solar cells for enhanced performance, J. Mater. Chem. C, vol. 6, no. 17, pp. 4746-4752, 2018.
[18]
X. Y. Liu, Z. Y. Liu, B. Sun, X. H. Tan, H. B. Ye, Y. X. Tu, T. L. Shi, Z. R. Tang, and G. L. Liao, 17.46% efficient and highly stable carbon-based planar perovskite solar cells employing Ni-doped rutile TiO2 as electron transport layer, Nano Energy, vol. 50, pp. 201-211, 2018.
[19]
B. X. Zhang, Z. L. Song, J. J. Jin, W. B. Bi, H. Li, C. Chen, Q. L. Dai, L. Xu, and H. W. Song, Efficient rare earth co-doped TiO2 electron transport layer for high-performance perovskite solar cells, J. Colloid Interface Sci., vol. 553, pp. 14-21, 2019.
[20]
D. Chen, T. Liu, Y. Zuo, C. Li, J. Zheng, Z. Liu, B. Liu, and B. Cheng, Brightness and lifetime improved light-emitting diodes from Sr-doped quasi-two-dimensional perovskite layers, Tsinghua Science and Technology, .
[21]
B. Roose, K. C. Gödel, S. Pathak, A. Sadhanala, J. P. C. Baena, B. D. Wilts, H. J. Snaith, U. Wiesner, M. Grätzel, U. Steiner, et al., Enhanced efficiency and stability of perovskite solar cells through Nd-doping of mesostructured TiO2, Adv. Energy Mater., vol. 6, no. 2, p. 1501868, 2016.
[22]
Y. H. Liao, Y. H. Chang, T. H. Lin, S. H. Chan, K. M. Lee, K. H. Hsu, J. F. Hsu, and M. C. Wu, Boosting the power conversion efficiency of perovskite solar cells based on Sn doped TiO2 electron extraction layer via modification the TiO2 phase junction, Solar Energy, vol. 205, pp. 390-398, 2020.
[23]
H. Nagaoka, F. Ma, D. W. deQuilettes, S. M. Vorpahl, M. S. Glaz, A. E. Colbert, M. E. Ziffer, and D. S. Ginger, Zr Incorporation into TiO2 electrodes reduces hysteresis and improves performance in hybrid perovskite solar cells while increasing carrier lifetimes, J. Phys. Chem. Lett., vol. 6, no. 4, pp. 669-675, 2015.
[24]
H. Guo, H. Y. Zhang, J. Yang, H. Y. Chen, Y. L. Li, L. P. Wang, and X. B. Niu, TiO2/SnO2 nanocomposites as electron transporting layer for efficiency enhancement in planar CH3NH3PbI3-based perovskite solar cells, ACS Appl. Energy Mater., vol. 1, no. 12, pp. 6936-6944, 2018.
[25]
X. Xu, H. Y. Zhang, J. J. Shi, J. Dong, Y. H. Luo, D. M. Li, and Q. B. Meng, Highly efficient planar perovskite solar cells with a TiO2/ZnO electron transport bilayer, J. Mater. Chem. A, vol. 3, no. 38, pp. 19288-19293, 2015.
[26]
J. Y. Seo, R. Uchida, H. S. Kim, Y. Saygili, J. S. Luo, C. Moore, J. Kerrod, A. Wagstaff, M. Eklund, R. Mclntyre, et al., Boosting the efficiency of perovskite solar cells with CsBr-modified mesoporous TiO2 beads as electron-selective contact, Adv. Funct. Mater., vol. 28, no. 15, p. 1705763, 2018.
[27]
G. S. Han, H. S. Chung, B. J. Kim, D. H. Kim, J. W. Lee, B. S. Swain, K. Mahmood, J. S. Yoo, N. G. Park, J. H. Lee, et al., Retarding charge recombination in perovskite solar cells using ultrathin MgO-coated TiO2 nanoparticulate films, J. Mater. Chem. A, vol. 3, no. 17, pp. 9160-9164, 2015.
[28]
S. Y. Abate, D.-C. Huang, and Y.-T. Tao. Surface modification of TiO2 layer with phosphonic acid monolayer in perovskite solar cells: Effect of chain length and terminal functional group, Organic Electronics, vol. 78, p. 105583, 2020.
[29]
S. Sidhik, S. S. Panikar, C. R. Pérez, T. L. Luke, R. Carriles, S. C. Carerra, and E. De La Rosa, Interfacial engineering of TiO2 by graphene nanoplatelets for high-efficiency hysteresis-free perovskite solar cells, ACS Sustainable Chem. Eng., vol. 6, no. 11, pp. 15391-15401, 2018.
[30]
J. T. W. Wang, J. M. Ball, E. M. Barea, A. Abate, J. A. Alexander-Webber, J. Huang, M. Saliba, I. Mora-Sero, J. Bisquert, H. J. Snaith, et al., Low-temperature processed electron collection layers of graphene/TiO2 nanocomposites in thin film perovskite solar cells, Nano Lett., vol. 14, no. 2, pp. 724-730, 2014.
[31]
X. Guo, B. J. Zhang, Z. H. Lin, J. Ma, J. Su, W. D. Zhu, C. F. Zhang, J. C. Zhang, J. J. Chang, and Y. Hao, Interface engineering of TiO2/perovskite interface via fullerene derivatives for high performance planar perovskite solar cells, Org. Electron., vol. 62, pp. 459-467, 2018.
[32]
Y. Ogomi, A. Morita, S. Tsukamoto, T. Saitho, Q. Shen, T. Toyoda, K. Yoshino, S. S. Pandey, T. L. Ma Tingli, and H. Shuzi, All-solid perovskite solar cells with HOCO-R-NH3+I- anchor-group inserted between porous titania and perovskite, J. Phys. Chem. C, vol. 118, no. 30, pp. 16651-16659, 2014.
[33]
Y. L. Yang, Z. H. Liu, W. K. Ng, L. H. Zhang, H. Zhang, X. Y. Meng, Y. Bai, S. Xiao, T. Zhang, C. Hu, et al., An ultrathin ferroelectric perovskite oxide layer for high-performance hole transport material free carbon based halide perovskite solar cells, Adv. Funct. Mater., vol. 29, no. 1, p. 1806506, 2018.
[34]
E. Mosconi, E. Ronca, and F. De Angelis, First-principles investigation of the TiO2/Organohalide perovskites interface: The role of interfacial chlorine, J. Phys. Chem. Lett., vol. 5, no. 15, pp. 2619-2625, 2014.
[35]
Q. Wang, M. Q. Lyu, M. Zhang, J. H. Yun, H. J. Chen, and L. Z. Wang, Transition from the tetragonal to cubic phase of organohalide perovskite: The role of chlorine in crystal formation of CH3NH3PbI3 on TiO2 Substrates, J. Phys. Chem. Lett., vol. 6, no. 21, pp. 4379-4384, 2015.
[36]
B. Y. Liu, X. P. Zou, D. Chen, T. R. Liu, Y. H. Zuo, J. Zheng, Z. Liu, and B. W. Cheng, Effect of chloride ion concentrations on luminescence peak blue shift of light-emitting diode using anti-solvent extraction of quasi-two-dimensional perovskite, Tsinghua Science and Technology, vol. 26, no. 4, pp. 496-504, 2021.
[37]
Q. Chen, H. P. Zhou, Y. H. Fang, A. Z. Stieg, T. B. Song, H. H. Wang, X. B. Xu, Y. S. Liu, S. R. Lu, J. B. You, et al., The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells, Nat. Commun., vol. 6, no. 1, p. 7269, 2015.
[38]
Q. Chen, H. P. Zhou, T. B. Song, S. Luo, Z. R. Hong, H. S. Duan, L. T. Dou, Y. S. Liu, and Y. Yang, Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells, Nano Lett., vol. 14, no. 7, pp. 4158-4163, 2014.