AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (611.3 KB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

Mechanical properties of root-soil composite in tree-covered landslide area based on field prototype test

Yun-zhao LIN1,2Wen-bin JIAN1,2( )Zeng-rong LAI1,2Xin ZHONG1,2Jun-yi ZHANG1,2Chang XIA3
Institute of Geotechnical and Geological Engineering, Fuzhou University, Fuzhou, Fujian 350108, China
Geological Engineering Research Center of Fujian University, Fuzhou University, Fuzhou, Fujian 350108, China
Fuzhou Planning Design and Research Institute, Fuzhou, Fujian 350108, China
Show Author Information

Abstract

In order to understand the mechanical characteristics of tree roots and their mechanical effects on slopes, the landslide in Wuping high vegetation coverage area of Fujian province was selected as the research site, and the root tensile mechanical properties of typical tree roots in the study area were tested after classification by diameter class. Furthermore, in-situ direct shear tests of root-soil composites under different root cross-sectional area ratios (RAR) and moisture content were conducted at the landslide site, and investigations were made into the distribution characteristics of roots in the profile to explore the mechanical effects of roots on shallow landslides. The results showed as follows: (1) The tensile force of Pinus massoniana and Cunninghamia lanceolata ranged from 12.45−673.09 N in 1−7 diameter class, and the tensile force was positively correlated with the root diameter by power function; The tensile strength ranges from 7.16 MPa to 60.95 MPa, and the tensile strength is negatively correlated with the root diameter as a power function. The average tensile force and tensile strength of Cunninghamia lanceolata root were higher than those of Pinus massoniana. (2) Tree roots significantly improved the shear strength of soil, and the additional cohesion provided by roots to soil was significantly positively correlated with the shear plane RAR. The root structure of Cunninghamia lanceolata is closer to R type, and that of Pinus massoniana is VH type. Under similar RAR, Cunninghamia lanceolata roots has a better reinforcing effect on the soil than Pinus massoniana. (3) With the increase in moisture content, the shear strength of the root-soil composites of Pinus massoniana and Cunninghamia lanceolata significantly decreases, as water infiltration diminishes the additional cohesion provided by the root systems to the soil. (4) Based on the Wu model, considering the influence of moisture content on soil cohesion and additional root cohesion, an estimation model for the shear strength value of root-soil composites considering moisture content was established. Upon verification, the accuracy of this model proved to be higher than that of the Wu model, and the results were reasonable. (5) Although the root system has a reinforcement effect on shallow landslides, its contribution to the stability of shallow landslides under heavy rainfall is limited due to the influence of root distribution depth, density and water infiltration.

References

【1】
【1】
 
 
Rock and Soil Mechanics
Pages 3423-3434

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LIN Y-z, JIAN W-b, LAI Z-r, et al. Mechanical properties of root-soil composite in tree-covered landslide area based on field prototype test. Rock and Soil Mechanics, 2024, 45(11): 3423-3434. https://doi.org/10.26599/RSM.2023.9436955

1061

Views

51

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 30 December 2023
Accepted: 19 February 2024
Published: 19 August 2025
© 2024 Rock and Soil Mechanics