Abstract
Lightweight microwave absorbers that simultaneously achieve strong attenuation and broad effective absorption bandwidths are highly desirable for electromagnetic protection and stealth applications. Herein, ultralight lamellar magnetic–dielectric aerogels are fabricated by coupling Ni–MOF nanoribbons with graphene oxide via an ice–templating assembly process, followed by carbonization. Strong interfacial compatibility between the Ni–MOF nanoribbons and graphene oxide facilitates their integration into hybrid building blocks, which are subsequently structured into aligned porous channels during ice-templating. Following carbonization, the magnetic components derived from the Ni–MOF nanoribbons become intimately coupled with graphene–derived carbon sheets, creating abundant magnetic–dielectric heterointerfaces throughout the lamellar porous framework. This hierarchical configuration enables tailorable electromagnetic parameters, thereby balancing impedance matching and attenuation capability. By systematically adjusting the carbonization temperature and the initial mass ratio of Ni–MOF nanoribbons to graphene oxide, the electromagnetic response of the aerogels was optimized. Notably, the optimized aerogel features an ultralow density of 4.45 mg·cm-3, while achieving a minimum reflection loss of −64 dB at 16.72 GHz with a matching thickness of 2.8 mm, alongside a maximum effective absorption bandwidth of 9.0 GHz at 3.4 mm. Furthermore, radar cross–section simulations indicate the potential of the aerogel for suppressing electromagnetic scattering under simulated far-field conditions. This work provides an effective strategy for constructing ultralight lamellar magnetic–dielectric aerogels for broadband microwave absorption.

京公网安备11010802044758号
Comments on this article