AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (8.3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access | Just Accepted

Ag-glued Au/C catalyst layer for durable CO2-to-CO electrolysis at industrial current density

Siyang Wang, Xueqin Wu, Wenrong Yang, Qianqian Ren, Abrar Amna, Shi Hu ( )

Department of Chemistry, School of Science, Tianjin Key Laboratory of Molecular Optoelectronic Science, Tianjin University, Tianjin 300072, China

Show Author Information

Abstract

Durable CO2-to-CO electrolysis at industrial current density remains a key bottleneck in low-temperature systems, especially in zero-gap electrolyzers, where prolonged high-rate operation drives impedance growth and destabilizes the catalyst-layer reaction environment. Here, we report an Ag-glued Au/C catalyst layer, in which large Ag nanoparticles are physically embedded in a nano-Au/C matrix. In a 10 cm × 10 cm zero-gap electrolyzer at 800 mA cm-2, Ag-glued Au/C (7:3) operated continuously for 200 h and degraded substantially more slowly than nano-Au/C, with cell-voltage and CO Faradaic-efficiency (FECO) decay rates of 1.3 mV h-1 and 0.12% h-1, respectively, and slower impedance growth. In flow cell tests, it reached 92.9% FECO at 139 mA cm-2. Neither AuAg alloying nor nanoscale Au/C-Ag/C mixing replicated this durability at the same composition, pointing to a catalyst-layer-organization effect that slows impedance growth under sustained operation. Within the configurations examined here, these results indicate that catalyst-layer organization, beyond composition, offers a practical design lever for durable CO2-to-CO electrolysis under industrially relevant zero-gap operation.

Graphical Abstract

References

【1】
【1】
 
 
Nano Research

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Wang S, Wu X, Yang W, et al. Ag-glued Au/C catalyst layer for durable CO2-to-CO electrolysis at industrial current density. Nano Research, 2026, https://doi.org/10.26599/NR.2026.94909274
Topics:

123

Views

9

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 02 May 2026
Revised: 24 September 2026
Accepted: 20 October 2026
Available online: 20 October 2026

© The Author(s) 2026. Published by Tsinghua University Press.

This is an open access article under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0, https://creativecommons.org/licenses/by/4.0/)