AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (5.5 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access | Just Accepted

Intelligent stability prediction of 3D contiguous I-shaped pile walls via finite element limit analysis and neuro-fuzzy optimization

Rithy Domphoeuna, Duy Tan Tranb, Raksiri Sukkarakc, Suraparb Keawsawasvonga( )

a Research Unit in Sciences and Innovative Technologies for Civil Engineering Infrastructures, Department of Civil Engineering, Thammasat School of Engineering, Thammasat University, Pathumthani 12120, Thailand

b University of Transport Ho Chi Minh City, 02 Vo Oanh, Thanh My Tay Ward, Ho Chi Minh City 72331, Vietnam

c Department of Teacher Training in Civil Engineering, Faculty of Technical Education, King Mongkut’s University of Technology North Bangkok, Bangkok 10800, Thailand

Show Author Information

Abstract

This study presents a stability analysis on three-dimensional (3D) contiguous I-shaped pile walls with c-ϕ backfill soil by using the three-dimensional finite element limit analysis (3D FELA) method. The stability number ( γcrH/C) of the 3D contiguous I-shaped pile walls was computed based on 3D FELA with many factors, including soil friction angle (ϕ), wall–soil interface roughness (m), height-to-flange width of ratio (H/B), pile spacing-to-flange width ratio (S/B), and length-to-width or embedment depth ratio (D/B). The stability number of the contiguous I-shaped pile wall increased continuously with increasing ϕ, m, and D/B, whereas it decreased with increasing S/B. Moreover, a hybrid machine learning method, adaptive neuro-fuzzy inference-genetic algorithm (ANFIS-GA), was used to model all the datasets. The results indicated that ANFIS-GA performed very well in predicting stability number with coefficients of determination (R2) of 0.985 and 0.972 for the training and testing datasets, respectively.

References

【1】
【1】
 
 
Journal of Intelligent Construction

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Domphoeun R, Tran DT, Sukkarak R, et al. Intelligent stability prediction of 3D contiguous I-shaped pile walls via finite element limit analysis and neuro-fuzzy optimization. Journal of Intelligent Construction, 2026, https://doi.org/10.26599/JIC.2026.9180138

281

Views

31

Downloads

0

Crossref

0

Scopus

Received: 08 June 2026
Revised: 09 August 2026
Accepted: 18 August 2026
Available online: 16 October 2026

© The Author(s) 2026.

The articles published in this open access journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, distribution and reproduction in any medium, provided the original work is properly cited.