AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.9 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Rapid Communication | Open Access | Just Accepted

Achieving room temperature plasticity in TiO2 ceramics by flash processing

Xinghua Su1( ), Zhenyu Li1, Xufei Fang2, Wenjun Lu3, Mengyao Wang1, Peng Zhao1

1 School of Materials Science and Engineering, Chang’an University, Xi’an 710061, China

2 Institute for Applied Materials, Karlsruhe Institute of Technology, Karlsruhe 76131, Germany

3 Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen 518055, China

Show Author Information

Abstract

Ceramics are indispensable materials for modern engineering and high-technology applications. However, the intrinsic brittleness at room temperature can cause catastrophic failure and severely limit their widespread applications. Here, we report a flash processing (FP) method based on the coupling of electric and thermal fields to significantly improve the room-temperature plasticity of TiO2 ceramics with a large plastic compressive strain of 15.4% during micropillar compression. This large room-temperature plasticity is attributed to the proliferation of stacking faults and twin boundaries during the loading process, which may be assisted by the high concentration of oxygen vacancies introduced by the FP method. Our findings suggest that FP can be a simple and effective method for achieving improved room-temperature plasticity of ceramic materials through defect engineering.

Graphical Abstract

Electronic Supplementary Material

Video
JAC1411-Movie_S1.mp4
JAC1411-Movie_S2.mp4
JAC1411-Movie_S3.mp4
Download File(s)
JAC1411-ESM.pdf (343.8 KB)

References

【1】
【1】
 
 
Journal of Advanced Ceramics

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Su X, Li Z, Fang X, et al. Achieving room temperature plasticity in TiO2 ceramics by flash processing. Journal of Advanced Ceramics, 2026, https://doi.org/10.26599/JAC.2026.9221411

282

Views

33

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 08 October 2026
Revised: 01 November 2026
Accepted: 18 November 2026
Available online: 18 November 2026

© The Author(s) 2026.

The articles published in this open access journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/).