Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
Search articles, authors, keywords, DOl and etc.
Lead-free relaxor ferroelectric ceramics are suitable for pulse energy storage. Achieving both high energy storage density and efficiency is crucial for research. Herein, a (1−x)(0.5Sr0.7Bi0.2TiO3–0.5K0.5Bi0.5TiO3)–xNaTaO3 relaxor ferroelectric ceramic is fabricated to optimize microstructures and energy storage behavior based on synergistic regulation engineering of charged defects at multi-sites. Na+ doping at the A-site contributes to polymorphic polarization; Ta5+ doping at the B-site refines the grain and increases the electrical resistance; and the transport of oxygen vacancy charged defects are significantly suppressed at the O-site through ion doping and the formation of a Bi2Ti2O7-based insulating phase. The introduction and synergistic regulation of these charged defects enhance the ionic and charge disorder and configurational entropy and induce more small-sized polar structures, resulting in enhanced relaxor ferroelectricity and delayed polarization saturation. Meanwhile, the micromorphology is improved, resulting in enhanced electrical insulation. Consequently, the polarization and breakdown behavior are optimized. 0.9(0.5Sr0.7Bi0.2TiO3–0.5K0.5Bi0.5TiO3)–0.1NaTaO3 exhibits low remnant polarization, high breakdown strength, and maximum polarization and achieves a high energy storage density of 5.68 J/cm3 with a high efficiency of 88.1% under a moderate operating electric field of 490 kV/cm and excellent temperature stability (−50–150 °C), frequency stability (10–500 Hz), and cycling stability. Meanwhile, the sample shows good pulsed charge–discharge properties with thermal stability and a long cycle life (105 cycles at 25 and 150 °C). Therefore, this sample demonstrates promising potential for pulse energy storage, and this study offers a novel strategy and mechanism for the design and optimization of advanced energy storage ceramics.

This is an open access article under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0, http://creativecommons.org/licenses/by/4.0/).
Comments on this article