AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (26.2 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

K0.5Na0.5NbO3-based multifunctional transparent ceramics for ultrahigh sensitive optical thermometry

Hua LiuSiqi YangXiyang MoMingsheng GuoHaolin TangQingchao ZengMao Ye( )Renkui ZhengShanming Ke( )
School of Physics and Materials Science, Guangzhou University, Guangzhou 510006, China
Show Author Information

Graphical Abstract

Abstract

K0.5Na0.5NbO3 (KNN)-based ceramics, with high Curie temperatures and good ferroelectric performance, show promising potential as functional materials. In this study, the incorporation of CaTiO3 (CT) into KNN-based ceramics resulted in a high density, submicrometer grain size, and pseudocubic phase, which collectively contributed to an impressive infrared transmittance of 78% at 1336 nm, as well as enhanced relaxor ferroelectric properties. A slim PE loop and well-defined polar nanoregions (PNRs) can be clearly observed in the samples when the CT content exceeds 0.175. Moreover, we demonstrate that ultrahigh sensitivity in temperature sensing can be achieved via Pr3+-doped KNN–CT on the basis of the fluorescence intensity ratio (FIR) of the 1D23H4 emission to the 3P03H5 emission. The FIR increases by as much as 75-fold when the temperature increases from room temperature to 500 K, resulting in exceptional absolute sensitivity (Sa = 0.139 K−1) and relative sensitivity (Sr = 2.69 %/K). This exceptional FIR performance is believed to be closely linked to the temperature-sensitive PNRs in KNNCT, highlighting its significant potential for applications in optical temperature sensors.

Electronic Supplementary Material

Download File(s)
JAC1045_ESM.pdf (1.9 MB)

References

[1]

Wang Y, Lei L, Ye R, et al. Integrating positive and negative thermal quenching effect for ultrasensitive ratiometric temperature sensing and anti-counterfeiting. ACS Appl Mater Inter 2021, 13: 23951–23959.

[2]

Dong B, Cao B, He Y, et al. Temperature sensing and in vivo imaging by molybdenum sensitized visible upconversion luminescence of rare-earth oxides. Adv Mater 2012, 24: 1987–1993.

[3]

Mahata MK, Kumar K, Rai VK. Er3+–Yb3+ doped vanadate nanocrystals: A highly sensitive thermographic phosphor and its optical nanoheater behavior. Sensor Actuat B Chem 2015, 209: 775–780.

[4]

Zheng SH, Chen WB, Tan DZ, et al. Lanthanide-doped NaGdF4 core–shell nanoparticles for non-contact self-referencing temperature sensors. Nanoscale 2014, 6: 5675–5679.

[5]

Pandey A, Rai VK, Kumar V, et al. Upconversion based temperature sensing ability of Er3+–Yb3+ codoped SrWO4: An optical heating phosphor. Sensor Actuat B Chem 2015, 209: 352–358.

[6]

Chen D, Wan Z, Zhou Y, et al. Dual-phase glass ceramic: Structure, dual-modal luminescence, and temperature sensing behaviors. ACS Appl Mater Inter 2015, 7: 19484–19493.

[7]

Cui Y, Song R, Yu J, et al. Dual-emitting MOF⊃dye composite for ratiometric temperature sensing. Adv Mater 2015, 27: 1420–1425.

[8]

Jahanbazi F, Mao YB. Recent advances on metal oxide-based luminescence thermometry. J Mater Chem C 2021, 9: 16410–16439.

[9]

Hemmer E, Quintanilla M, Légaré F, et al. Temperature-induced energy transfer in dye-conjugated upconverting nanoparticles: A new candidate for nanothermometry. Chem Mater 2015, 27: 235–244.

[10]

Xu W, Song Q, Zheng L, et al. Optical temperature sensing based on the near-infrared emissions from Nd3+/Yb3+ codoped CaWO4. Opt Lett 2014, 39: 4635–4638.

[11]

Struck CW, Fonger WH. Thermal quenching of Tb+3, Tm+3, Pr+3, and Dy+3 4f n emitting states in La2O2S. J Appl Phys 1971, 42: 4515–4516.

[12]

Gao Y, Huang F, Lin H, et al. A novel optical thermometry strategy based on diverse thermal response from two intervalence charge transfer states. Adv Funct Mater 2016, 26: 3139–3145.

[13]

Lu KL, Ye YC, Han WH, et al. Defect elimination to enhance photoluminescence and optical transparency of Pr-doped ceramics for self-calibrated temperature feedback windows. J Adv Ceram 2023, 12: 681–694.

[14]

Zhang AQ, Sun Z, Wang ZY, et al. Self-calibrated ratiometric thermometers and multi-mode anti-counterfeiting based on Ca2LaNbO6:Pr3+ optical material. Scripta Mater 2022, 211: 114515.

[15]

Gao Y, Huang F, Lin H, et al. Intervalence charge transfer state interfered Pr3+ luminescence: A novel strategy for high sensitive optical thermometry. Sensor Actuat B Chem 2017, 243: 137–143.

[16]

Gao Y, Cheng Y, Hu T, et al. Broadening the valid temperature range of optical thermometry through dual-mode design. J Mater Chem C 2018, 6: 11178–11183.

[17]

Jahanbazi F, Wang YM, Dorman JA, et al. La2Zr2O7:Pr3+ nanoparticles for luminescence thermometry based on a single parameter over a wide temperature range of 620 K. J Alloys Compd 2022, 911: 165013.

[18]

Wang S, Ma S, Zhang G, et al. High-performance Pr3+-doped scandate optical thermometry: 200 K of sensing range with relative temperature sensitivity above 2%·K−1. ACS Appl Mater Inter 2019, 11: 42330–42338.

[19]

Brites CDS, Fiaczyk K, Ramalho JFCB, et al. Widening the temperature range of luminescent thermometers through the intra- and interconfigurational transitions of Pr3+. Adv Opt Mater 2018, 6: 1701318.

[20]

Tian XL, Wu Z, Jia YM, et al. Remanent-polarization-induced enhancement of photoluminescence in Pr3+-doped lead-free ferroelectric (Bi0.5Na0.5)TiO3 ceramic. Appl Phys Lett 2013, 102: 042907.

[21]

Wei YB, Wu Z, Jia YM, et al. Dual-enhancement of Ferro-/piezoelectric and photoluminescent performance in Pr3+ doped (K0.5Na0.5)NbO3 lead-free ceramics. Appl Phys Lett 2014, 105: 042902.

[22]

Sun MZ, Li P, Hu CC, et al. Polarization-induced phase structure transition and change of photoluminescence in Er3+-doped (Ba,Ca)(Ti,Sn)O3-based multifunctional ceramics. J Mater Sci 2021, 56: 10204–10217.

[23]

Li W, Wang Z, Hao JG, et al. Poling effects on the structural, electrical and photoluminescence properties in Sm doped BCST piezoelectric ceramics. J Mater Chem C 2018, 6: 11312–11319.

[24]

Ye M, Huang HT, Li T, et al. Temperature-dependent reversible and irreversible processes in Nb-doped PbZrO3 relaxor ferroelectric thin films. Appl Phys Lett 2015, 107: 202902.

[25]

Ke SM, Fan HQ, Huang HT. Revisit of the Vögel–Fulcher freezing in lead magnesium niobate relaxors. Appl Phys Lett 2010, 97: 132905.

[26]

Guo YP, Kakimoto KI, Ohsato H. Dielectric and piezoelectric properties of lead-free (Na0.5K0.5)NbO3–SrTiO3 ceramics. Solid State Commun 2004, 129: 279–284.

[27]

Peng C, Hou Z, Zhang C, et al. Synthesis and luminescent properties of CaTiO3: Pr3+ microfibers prepared by electrospinning method. Opt Express 2010, 18: 7543–7553.

[28]

Qu BY, Du HL, Yang ZT. Lead-free relaxor ferroelectric ceramics with high optical transparency and energy storage ability. J Mater Chem C 2016, 4: 1795–1803.

[29]

Dai ZH, Li DY, Zhou ZJ, et al. A strategy for high performance of energy storage and transparency in KNN-based ferroelectric ceramics. Chem Eng J 2022, 427: 131959.

[30]

Wooten F, Davis SP. Optical properties of solids. Am J Phys 1973, 41: 939–940.

[31]

Wang SF, Zhang J, Luo DW, et al. Transparent ceramics: Processing, materials and applications. Prog Solid State Ch 2013, 41: 20–54.

[32]

Kosec M, Bobnar V, Hrovat M, et al. New lead-free relaxors based on the K0.5Na0.5NbO3–SrTiO3 solid solution. J Mater Res 2004, 19: 1849–1854.

[33]

Li CC, Wang ZG, Li F, et al. Large flexoelectric response in PMN-PT ceramics through composition design. Appl Phys Lett 2019, 115: 142901.

[34]

Tan XH, Fan HQ, Ke SM, et al. Structural dependence of piezoelectric, dielectric and ferroelectric properties of K0.5Na0.5(Nb1−2 x /5Cu x )O3 lead-free ceramics with high Qm. Mater Res Bull 2012, 47: 4472–4477.

[35]

Bobnar V, Bernard J, Kosec M. Relaxorlike dielectric properties and history-dependent effects in the lead-free K0.5Na0.5NbO3–SrTiO3 ceramic system. Appl Phys Lett 2004, 85: 994–996.

[36]

Zhang LL, Huang YN. Theory of relaxor-ferroelectricity. Sci Rep 2020, 10: 5060.

[37]

Bokov AA, Ye ZG. Recent progress in relaxor ferroelectrics with perovskite structure. J Mater Sci 2006, 41: 31–52.

[38]
Boutinaud P, Pinel E, Dubois M, et al. UV-to-red relaxation pathways in CaTiO3:Pr3+. J Lumin 2005, 111 : 69–80.
[39]

Boutinaud P, Mahiou R, Cavalli E, et al. Red luminescence induced by intervalence charge transfer in Pr3+-doped compounds. J Lumin 2007, 122: 430–433.

[40]

Boutinaud P, Pinel E, Oubaha M, et al. Making red emitting phosphors with Pr3+. Opt Mater 2006, 28: 9–13.

[41]

Wade SA, Collins SF, Baxter GW. Fluorescence intensity ratio technique for optical fiber point temperature sensing. J Appl Phys 2003, 94: 4743–4756.

[42]

Qiu XC, Zhou QW, Zhu XJ, et al. Ratiometric upconversion nanothermometry with dual emission at the same wavelength decoded via a time-resolved technique. Nat Commun 2020, 11: 4.

[43]

Shi R, Lin LT, Dorenbos P, et al. Development of a potential optical thermometric material through photoluminescence of Pr3+ in La2MgTiO6. J Mater Chem C 2017, 5: 10737–10745.

[44]

Zhang H, Gao ZY, Li GG, et al. A ratiometric optical thermometer with multi-color emission and high sensitivity based on double perovskite LaMg0.402Nb0.598O3:Pr3+ thermochromic phosphors. Chem Eng J 2020, 380: 122491.

[45]

Trojan-Piegza J, Brites CDS, Ramalho JFCB, et al. La0.4Gd1.6Zr2O7:0.1%Pr transparent sintered ceramic–a wide-range luminescence thermometer. J Mater Chem C 2020, 8: 7005–7011.

[46]

Hu S, Lu CH, Liu XX, et al. Optical temperature sensing based on the luminescence from YAG:Pr transparent ceramics. Opt Mater 2016, 60: 394–397.

[47]

Yu FY, Ma BW, Xie ZQ, et al. Developing “smart windows” for optical storage and temperature sensing based on KNN transparent ceramics. J Eur Ceram Soc 2023, 43: 4408–4418.

[48]

Zhou J, Chen YQ, Lei RS, et al. Role of Er3+ concentration on the photoluminescence and temperature sensing properties in Er3+ doped Y2O3 based transparent ceramics. J Lumin 2019, 215: 116671.

[49]

Li W, Wang D, Li XF, et al. Optical temperature sensing properties and thermoluminescence behavior in Er-modified potassium sodium niobate-based multifunctional ferroelectric ceramics. J Mater Chem C 2022, 10: 11891–11902.

[50]

Mao WJ, Jia YM, Wu J, et al. Optical temperature sensing of piezoelectric Er3+-doped (Ba0.97Ca0.03)(Sn0.06Ti0.94)O3 ceramic. Funct Mater Lett 2016, 9: 1650060.

Journal of Advanced Ceramics
Article number: 9221045
Cite this article:
Liu H, Yang S, Mo X, et al. K0.5Na0.5NbO3-based multifunctional transparent ceramics for ultrahigh sensitive optical thermometry. Journal of Advanced Ceramics, 2025, 14(3): 9221045. https://doi.org/10.26599/JAC.2025.9221045

490

Views

97

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Altmetrics

Received: 02 December 2024
Revised: 19 January 2025
Accepted: 08 February 2025
Published: 17 March 2025
© The Author(s) 2025.

This is an open access article under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0, http://creativecommons.org/licenses/by/4.0/).

Return