AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Home Friction Article
PDF (4.9 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access | Just Accepted

Synergy of ternary lubricants and biomimetic honeycomb textures: Stagewise intelligent lubrication and protection from 25 to 800 °C

Yuhang Zhanga,b, Yaoning Suna( ), Zhenyu Bub, Xiujuan Fanb, Canwei Hanb, Yizhe Lvb, Chunfeng Mac, Jiansen Panc, Chunming Dengb, Shuangjian Lib( )

a School of Mechanical Engineering, Xinjiang University, Urumqi, 830017, China

b Institute of New Materials, Guangdong Academy of Sciences, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Guangdong Provincial Key Laboratory of Modern Surface Engineering Technology, Guangzhou, 510651, China

c Faculty of Materials Science and Engineering South China University of Technology, Guangzhou, 510640, China

Show Author Information

Abstract

Wide-temperature adaptive coatings are critical for mitigating tribological failure in marine and aerospace systems. Conventional Cr₃C₂-NiCr coatings offer excellent wear resistance and oxidation stability, but their intrinsically poor self-lubrication limits practical engineering applications. Herein, we developed a hybrid “laser-textured reservoir + vacuum infiltration” strategy to engineer biomimetic honeycomb microstructures on Cr₃C₂-NiCr coatings as in situ reservoirs for B₂O₃/Bi₂O₃/C ternary solid lubricant. The coating achieved average friction coefficients of 0.08, 0.14, and 0.12 at 25 °C, 400 °C, and 800 °C, corresponding to 90.5%, 75.4%, and 76.9% reductions relative to the unmodified counterpart, and maintained stable performance after four consecutive wide-temperature thermal cycles. Remarkably, after four thermal cycles at 800 °C, the wear rate of the novel composite coating (0.15 × 10⁻⁵ mm³/(N·m)) is two orders of magnitude lower than that of the pristine coating (13.86 × 10⁻⁵ mm³/(N·m)). A stagewise intelligent synergistic lubrication mechanism was elucidated: room-temperature graphite sliding, medium-temperature multiphase synergy, and high-temperature dual-glaze-layer protection. The high-temperature stage exhibits fourfold protective functions: fourfold protective functions: liquid lubrication provided by molten B₂O₃/Bi₂O₃; wear-debris encapsulation by the liquid film enveloping wear debris; oxidation barrier by the glaze layer blocking oxygen diffusion into the coating and graphite interior; and structural support provided by the inner nanocrystalline oxide framework. Molecular dynamics simulations revealed the atomic-scale crystalline-to-amorphous transformation of B₂O₃/Bi₂O₃ at elevated temperatures. This work provides a robust fabrication strategy and novel insights into the design of next-generation high-performance, wide-temperature-range intelligent adaptive lubricating coatings.

Graphical Abstract

Electronic Supplementary Material

Video
F1338-ESM-Movie_S1.mp4
Download File(s)
F1338-ESM.pdf (1.2 MB)

References

【1】
【1】
 
 
Friction

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhang Y, Sun Y, Bu Z, et al. Synergy of ternary lubricants and biomimetic honeycomb textures: Stagewise intelligent lubrication and protection from 25 to 800 °C. Friction, 2026, https://doi.org/10.26599/FRICT.2026.9441338

105

Views

8

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 18 August 2026
Revised: 09 November 2026
Accepted: 18 November 2026
Available online: 20 November 2026

© The Author(s) 2026.

This is an open access article under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0, http://creativecommons.org/licenses/by/4.0/).