AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Home Friction Article
PDF (9.5 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Review Article | Open Access | Online First

Carbon-based nanomaterials as cutting fluid additives: A review

Xinmin Wang1, Keyu Zhang1, Hui Song2, Yufu Xu1( )
Institute of Tribology, School of Mechanical Engineering, Hefei University of Technology, Hefei 230009, China
Department of Mechanical Design, School of Mechanical Engineering, Hefei University of Technology, Hefei 230009, China
Show Author Information

Abstract

Metalworking fluids are commonly used in the machining processes of diverse equipment components to provide cooling, cleaning, rust prevention, and lubrication. The incorporation of cutting fluid additives further enhances their performance. In recent years, carbon-based nanomaterials have attracted attention as environmentally friendly additives for cutting fluids. This work reviews the research progress on carbon-based nanomaterials as cutting fluid additives, analyzes the effects of factors such as the dispersibility of carbon-based nanomaterials, cutting fluid types, and cutting parameters on machining performance, and discusses the friction reduction and anti-wear mechanisms of carbon-based nanomaterials. Finally, current challenges and future prospects for carbon-based cutting fluid additives are outlined. This review aims to provide guidance and references for achieving efficient and environmentally friendly machining of difficult-to-process materials.

Graphical Abstract

References

【1】
【1】
 
 
Friction

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Wang X, Zhang K, Song H, et al. Carbon-based nanomaterials as cutting fluid additives: A review. Friction, 2026, https://doi.org/10.26599/FRICT.2026.9441275

1102

Views

87

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 26 December 2025
Revised: 21 April 2026
Accepted: 03 June 2026
Published: 17 November 2026
© The Author(s) 2027.

This is an open access article under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0, http://creativecommons.org/licenses/by/4.0/).