Friction power loss in ball bearings: Correlation with bearing skidding and cage motion stability

Zhou J. Intelligent manufacturing—Main direction of “made in China 2025”. China Mechanical Engineering 26(17): 2273–2284 (2015) (in Chinese)

Yan K, Dong L, Zheng J H, Li B T, Wang D F, Sun Y J. Flow performance analysis of different air supply methods for high speed and low friction ball bearing. Tribol Int 121: 94–107 (2018)

Zhu A H, Zhu C J, Zhang W H. Analysis on calculation of friction torque of rolling bearings. Bearing 7: 1–3 (2008) (in Chinese)

Pinheiro K A, Custódio Filho S de S, Vaz J R P, Mesquita A L A. Effect of bearing dissipative torques on the dynamic behavior of H-Darrieus wind turbines. J Braz Soc Mech Sci Eng 43: 410 (2021)

Harris T A, Barnsby R M. Tribological performance prediction of aircraft gas turbine mainshaft ball bearings. Tribol Trans 41(1): 60–68 (1998)

Yan K, Wang Y T, Zhu Y S, Hong J, Zhai Q. Investigation on heat dissipation characteristic of ball bearing cage and inside cavity at ultra high rotation speed. Tribol Int 93: 470–481 (2016)

Yan K, Wang Y T, Zhu Y S, Hong J. Investigation on the effect of sealing condition on the internal flow pattern of high-speed ball bearing. Tribol Int 105: 85–93 (2017)

Yang Z H, Yu T X, Zhang Y G, Sun Z C. Influence of cage clearance on the heating characteristics of high-speed ball bearings. Tribol Int 105: 125–134 (2017)

Zhang C, Gu L, Mao Y Z, Wang L Q. Modeling the frictional torque of a dry-lubricated tapered roller bearing considering the roller skewing. Friction 7(6): 551–563 (2019)

Zhao Y H, Ma Z K, Zi Y Y. Skidding and spinning investigation for dry-lubricated angular contact ball bearing under combined loads. Friction 11(11): 1987–2007 (2023)

Zhao Y H, Zi Y Y, Chen Z Y, Zhang M Q, Zhu Y H, Yin J S. Power loss investigation of ball bearings considering rolling-sliding contacts. Int J Mech Sci 250: 108318 (2023)

Escanciano I, Heras I, Macareno L M, Aguirrebeitia J. An engineering approach to assess friction torque in generally loaded four-point contact slewing bearings. Mech Mach Theory 192: 105542 (2024)

Heras I, Aguirrebeitia J, Abasolo M. Friction torque in four contact point slewing bearings: Effect of manufacturing errors and ring stiffness. Mech Mach Theory 112: 145–154 (2017)

Darul L, Touret T, Changenet C, Ville F. Power losses of oil-jet lubricated ball bearings with limited applied load: Part 1—Theoretical analysis. Tribol T 66(5): 801–808 (2023)

Kingsbury E P. Torque variations in instrument ball bearings. ASLE Trans 8(4): 435–441 (1965)

Kingsbury E, Walker R. Motions of an unstable retainer in an instrument ball bearing. J Tribol 116(2): 202–208 (1994)

Meeks C R, Ng K O. The dynamics of ball separators in ball bearings: Part I: Analysis. ASLE Trans 28(3): 277–287 (1985)

Meeks C R, Tran L. Ball bearing dynamic analysis using computer methods: Part I: Analysis. J Tribol 118(1): 52–58 (1996)

Gupta P K. Modeling of instabilities induced by cage clearances in ball bearings. Tribol Trans 34(1): 93–99 (1991)

Cao H R, Li Y M, Chen X F. A new dynamic model of ball-bearing rotor systems based on rigid body element. J Manuf Sci Eng 138(7): 071007 (2016)

Li Y M, Cao H R, Niu L K, Jin X L. A general method for the dynamic modeling of ball bearing–rotor systems. J Manuf Sci Eng 137(2): 021016 (2015)

Niu L K, Cao H R, He Z J, Li Y M. An investigation on the occurrence of stable cage whirl motions in ball bearings based on dynamic simulations. Tribol Int 103: 12–24 (2016)

Liu Y Q, Wang W Z, Liang H, Qing T, Wang Y L, Zhang S H. Nonlinear dynamic behavior of angular contact ball bearings under microgravity and gravity. Int J Mech Sci 183: 105782 (2020)

Liu J, Xu Y J, Pan G. A combined acoustic and dynamic model of a defective ball bearing. J Sound Vib 501: 116029 (2021)

Gao S, Han Q K, Pennacchi P, Chatterton S, Chu F L. Dynamic, thermal, and vibrational analysis of ball bearings with over-skidding behavior. Friction 11(4): 580–601 (2023)

Deng S, Chang H Y, Zhu X L, Qian D S, Hua L, Jiang S F. Sensitivity of different types of structural size combinations to dynamic stability and vibration of angular contact ball bearings based on nonlinear dynamic model. Tribol Int 181: 108309 (2023)

Liu Y Q, Chen Z G, Li Y F, Zhai W M. Dynamic investigation and alleviative measures for the skidding phenomenon of lubricated rolling bearing under light load. Mech Syst Signal Pr 184: 109685 (2023)

Yu J, Zhu S L, Yuan W, Chen X Y, He L, Guo Q J. Investigation on the friction heat generation rate of ball bearings at ultra-high rotation speed. Int J Adv Manuf Technol 128(1): 57–79 (2023)

Deng S, Zhao C, Yang C, Qian D S, Jiang S F. Correlation between vibration and power consumption of angular contact ball bearings under structural size combinations based on nonlinear dynamic model. Nonlinear Dyn 111(17): 16021–16047 (2023)

Liu J, Li X B, Ding S Z, Pang R K. A time-varying friction moment calculation method of an angular contact ball bearing with the waviness error. Mech Mach Theory 148: 103799 (2020)

Wang M K, Yan K, Zhang X H, Zhu Y S, Hong J. A comprehensive study on dynamic performance of ball bearing considering bearing deformations and ball-inner raceway separation. Mech Syst Signal Pr 185: 109826 (2023)

Wang M K, Yan K, Tang Q, Guo J D, Zhu Y S, Hong J. Dynamic modeling and properties analysis for ball bearing driven by structure flexible deformations. Tribol Int 179: 108163 (2023)

Wang D, Cao H R, Yang Y, Du M G. Dynamic modeling and vibration analysis of cracked rotor-bearing system based on rigid body element method. Mech Syst Signal Pr 191: 110152 (2023)

Xu H Y, Yang Y, Ma H, Luo Z, Li X P, Han Q K, Wen B C. Vibration characteristics of bearing-rotor systems with inner ring dynamic misalignment. Int J Mech Sci 230: 107536 (2022)

Jones A B. A general theory for elastically constrained ball and radial roller bearings under arbitrary load and speed conditions. J Basic Eng 82(2): 309–320 (1960)

Wen C W, Meng X H, Gu J M, Xiao L, Jiang S, Bi H B. Starved lubrication analysis of angular contact ball bearing based on a multi-degree-of-freedom tribo-dynamic model. Friction 11(8): 1395–1418 (2023)

Zhou C J, Xiao Z L, Chen S Y, Han X. Normal and tangential oil film stiffness of modified spur gear with non-Newtonian elastohydrodynamic lubrication. Tribol Int 109: 319–327 (2017)

Han Q K, Chu F L. Nonlinear dynamic model for skidding behavior of angular contact ball bearings. J Sound Vib 354: 219–235 (2015)

Wang Y L, Wang W Z, Zhang S G, Zhao Z Q. Investigation of skidding in angular contact ball bearings under high speed. Tribol Int 92: 404–417 (2015)

Masjedi M, Khonsari M M. A study on the effect of starvation in mixed elastohydrodynamic lubrication. Tribol Int 85: 26–36 (2015)

Pederson B M, Sadeghi F, Wassgren C. The effects of cage flexibility on ball-to-cage pocket contact forces and cage instability in deep groove ball bearings. SAE Trans 115: 260–271 (2006)

Cobanoglu T, Ozturk S. Effect of burnishing parameters on the surface quality and hardness. P I Mech Eng B—J Eng 229(2): 286–294 (2015)

Liu Y Q, Chen Z G, Ning J Y, Wang K Y, Zhai W M. Improved dynamics model of locomotive traction motor with elasticity of rotor shaft and supporting bearings. Chin J Mech Eng 35(1): 90 (2022)

Cavallaro G, Nelias D, Bon F. Analysis of high-speed intershaft cylindrical roller bearing with flexible rings. Tribol Trans 48(2): 154–164 (2005)

Gao S, Han Q K, Zhou N N, Zhang F B, Yang Z H, Chatterton S, Pennacchi P. Dynamic and wear characteristics of self-lubricating bearing cage: Effects of cage pocket shape. Nonlinear Dyn 110(1): 177–200 (2022)