AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (12.5 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Review | Open Access | Online First

Porous carbon-based materials for electrochemical CO2 capture by supercapacitive swing adsorption

Jiaxin Li† ( ), Fei Li
ARC Centre of Excellence for Carbon Science and Innovation, School of Chemical Engineering, University of New South Wales, Sydney, New South Wales 2052, Australia
Present address: Yusuf Hamied Department of Chemistry, University of Cambridge, Cambridge CB2 1EW, UK
Show Author Information

Abstract

Electrochemical supercapacitive swing adsorption (SSA) is an emerging low-energy CO2 capture technology that couples reversible charge storage with electrically driven CO2 uptake and release. Porous carbon electrodes are central to SSA because they govern charge storage, ion adsorption and transport, and interfacial CO2 enrichment, thereby determining capture performance. However, the relationships between carbon structure, interfacial electrochemistry, and CO2 capture mechanisms remain poorly understood. This review provides a carbon-centered perspective on SSA. First, the fundamentals of SSA, including cell configurations, electrode materials, and proposed capture mechanisms, are summarized, with particular attention to the evolution of carbon electrodes from commercial porous carbons to tailored porous carbons, quinone-functionalized carbons, and covalent organic framework-based composites. Then, emerging structure–performance relationships and derived empirical design principles for SSA electrodes are discussed, focusing on the influence of surface area, pore architecture, and surface chemistry on CO2 capture capacity, kinetics, and energy consumption. Finally, key challenges and opportunities in mechanistic understanding, material and device design, evaluation under realistic conditions, integration of CO2 capture with utilization, and technoeconomic analysis and life-cycle assessment are highlighted. By linking carbon structure to interfacial processes and device-level performance, this review provides a framework for the rational design of scalable SSA systems for electrochemical carbon capture.

Graphical Abstract

This review provides a carbon-centered perspective on supercapacitive swing adsorption (SSA) for electrochemical CO2 capture. It highlights advances in porous carbon electrodes, discusses emerging structure–performance relationships and capture mechanisms, and outlines future directions toward scalable and energy-efficient SSA.

References

【1】
【1】
 
 
Carbon Future

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Li J, Li F. Porous carbon-based materials for electrochemical CO2 capture by supercapacitive swing adsorption. Carbon Future, 2026, https://doi.org/10.26599/CF.2026.9200091

569

Views

65

Downloads

0

Crossref

0

Scopus

Received: 29 August 2026
Revised: 16 September 2026
Accepted: 21 September 2026
Published: 19 November 2026
© The author(s) 2026. Published by Tsinghua University Press.

Open AccessThis article is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, distribution and reproduction in any medium, provided the original work is properly cited.