AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Submit Manuscript
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access | Just Accepted

Artificial lightweight aggregates from mining and siderurgical wastes: Agronomic validation as soilless growing media

Rosendo J. Galán-Arboledas1( ), María del Pilar Cordovilla2, F. J. Troyano-Pérez1, Ana C. Revelo-Rodríguez1, Alejandro Dubbelman-Vizcaino1, Carlos J. Cobo-Ceacero1

1 Department of Chemical, Environmental and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaen, Jaén 23700, Spain

2 Laboratory of Plant Physiology, Department of Animal Biology, Plant Biology and Ecology, Institute of Research on Olive Groves and Olive Oils, University of Jaén, Jaen 23071, Spain

Show Author Information

Abstract

This study investigates the viability of artificial lightweight aggregates (ALAs), manufactured from iron oxide-rich waste from the steel industry (EC) and the mining industry (DOF), as sustainable inert substrates for soilless cultivation systems. Two ALAs (DOF-2 and EC-4) were formulated, shaped by extrusion and sintered in a rotary kiln. The resulting aggregates exhibited bulk densities of 335 and 270 kg/m3, a pore volume between particles (macroporosity) of ≈45% and a water absorption capacity of ≈22% (microporosity). Both materials are chemically stable under the tested conditions, displaying a neutral pH, low electrical conductivity and compliance with Class A heavy metal leaching limits according to Spanish Royal Decree (RD) 865/2010, ensuring their safety for horticultural crops intended for human consumption. Unlike previous studies focused primarily on aggregate formation and formulation optimization, this work integrates the production of ALAs from real iron-rich industrial wastes with their characterization as growing media and the agronomic validation in two crops. Agronomic validation was carried out using the DOF-2 aggregate as an experimental substrate (ES) in sunflower (Helianthus annuus) and lettuce (Lactuca sativa) crops, comparing it with commercial substrates such as vermiculite (V) and perlite (P). The results show that the experimental substrate exhibits drainage behaviour that promotes root aeration, similar to that of expanded perlite, with adequate macroporosity values. However, due to their low water-holding capacity or microporosity, plants grown solely in the experimental substrate showed a reduction in the physiological parameters studied (chlorophyll, An, E, gs, Ci and WUEi), which resulted in lower biomass production. On the other hand, the use of mixed substrates (V+ES) compensated for these water-related limitations, achieving physiological and vegetative growth parameters equivalent to those of vermiculite. These results demonstrate that the developed ALAs have high potential as soilless growing media in mixed substrates for hydroponic crops.

References

【1】
【1】
 
 
Circular Economy

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
J. Galán-Arboledas R, Cordovilla MdP, Troyano-Pérez FJ, et al. Artificial lightweight aggregates from mining and siderurgical wastes: Agronomic validation as soilless growing media. Circular Economy, 2026, https://doi.org/10.26599/CE.2026.9730121

46

Views

0

Crossref

0

Web of Science

0

Scopus

Received: 05 May 2026
Revised: 28 July 2026
Accepted: 02 September 2026
Available online: 20 November 2026

© The author(s) 2026. Published by Tsinghua University Press.

This article is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the original author(s) and the source, a link to the license is provided, and any changes made are indicated. See https://creativecommons.org/licenses/by/4.0/