AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Regular Paper | Open Access

Cascaded Multiscale Modeling Method of Inertia-controlled Wind Turbine for System Transient Mechanism Analysis

Rui Zhang( ), Xiaoming Yuan, Jiabing Hu
State Key Lab of Advanced Electromagnetic Engineering Technology, Huazhong University of Science and Technology, Wuhan 430074, China
Show Author Information

Abstract

Transient process of power systems is increasingly dependent on and challenged by renewable generation(RG). From its multiscale normal/switch elements, RG forms an internal voltage to network as system source and determines the system transient. Due to multiscale feature, these normal/switch elements are activated sequentially after a fault, causing the RG’s internal voltage to exhibit complex multiscale dynamics, which in turn makes the system transient behavior distinct from that of traditional systems. The multiscale formation of RG’s internal voltage is thus essential for transient and needs to be studied. Existing models of RG are mostly established with original connection of normal/switch elements, but not in multiscale view. Therefore, taking inertia-controlled type-4 wind turbine(WT) as an example, this paper thus proposes a cascaded multiscale modeling method for system transient mechanism analysis. First, multiscale sequential activation of normal/switch controls is shown. It is illustrated that multiscale feature is essential for internal voltage formation. Second, the cascaded multiscale model of inertia-controlled type-4 WT is proposed and the internal voltage formation in multiscale view is revealed, which is formed from parallel feedbacks and serial responses. Finally, based on the proposed model, it is explained the interaction process between WTs to influence energy accumulations of their multiscale physical elements. Simulations for model validation are also included.

References

【1】
【1】
 
 
CSEE Journal of Power and Energy Systems
Pages 2341-2351

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhang R, Yuan X, Hu J. Cascaded Multiscale Modeling Method of Inertia-controlled Wind Turbine for System Transient Mechanism Analysis. CSEE Journal of Power and Energy Systems, 2026, 12(5): 2341-2351. https://doi.org/10.17775/CSEEJPES.2022.07040

12

Views

0

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 17 October 2022
Revised: 17 February 2023
Accepted: 15 March 2023
Published: 08 September 2023
© 2022 CSEE.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).