Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
Search articles, authors, keywords, DOl and etc.
Transient process of power systems is increasingly dependent on and challenged by renewable generation(RG). From its multiscale normal/switch elements, RG forms an internal voltage to network as system source and determines the system transient. Due to multiscale feature, these normal/switch elements are activated sequentially after a fault, causing the RG’s internal voltage to exhibit complex multiscale dynamics, which in turn makes the system transient behavior distinct from that of traditional systems. The multiscale formation of RG’s internal voltage is thus essential for transient and needs to be studied. Existing models of RG are mostly established with original connection of normal/switch elements, but not in multiscale view. Therefore, taking inertia-controlled type-4 wind turbine(WT) as an example, this paper thus proposes a cascaded multiscale modeling method for system transient mechanism analysis. First, multiscale sequential activation of normal/switch controls is shown. It is illustrated that multiscale feature is essential for internal voltage formation. Second, the cascaded multiscale model of inertia-controlled type-4 WT is proposed and the internal voltage formation in multiscale view is revealed, which is formed from parallel feedbacks and serial responses. Finally, based on the proposed model, it is explained the interaction process between WTs to influence energy accumulations of their multiscale physical elements. Simulations for model validation are also included.
This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Comments on this article