AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (2.8 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Regular Paper | Open Access

Non-unit Fault Location for MMC-HVDC Grids Based on Geometric Features of Fault Voltage

Xiuyong Yu1( ), Juping Gu1, Xinsong Zhang1, Jingfeng Mao1, Liye Xiao2
School of Electrical Engineering, Nantong University, Nantong 226019, China
Institute of Electrical Engineering, University of Chinese Academy of Sciences, Beijing 100190, China
Show Author Information

Abstract

The modular multilevel converter (MMC) HVDC grid is a prospective technical route to unravel the high permeability of the renewable energy grid. The protection issues of MMC-HVDC grids are the main obstacle to its further development. In particular, an accurate and fast fault location scheme is essential to speeding up the time of fault clearing and power supply interruption. In this paper, a non-unit fault location scheme, that can be employed as a distance protection criterion for MMC-HVDC grids, is proposed based on the geometric features of the fault voltage. First, the fault transient characteristics are analyzed by solving the built equivalent circuit of MMC-HVDC grids after DC line faults. The multi-refection and refraction of the fault voltages between the line terminal and the fault point are evaluated. A time domain multi-resolution morphological gradient algorithm (MMGA) is utilized to obtain the geometric characteristics of the fault waveform. The change direction and the corresponding time of the initial two heads of the fault voltage can be recorded, and together with the estimated wave velocity, the search region of the target wave head with definite change direction can be obtained. Therefore, the proposed scheme is almost immune to the velocity of fault waves, fault resistances, and fault positions. A four-terminal ±500 kV MMC-HVDC grid built in PSCAD/EMTDC demonstrates the higher performance of the proposed scheme under different fault conditions, size of fault current limiting reactor, sampling frequency, and noise environments.

References

【1】
【1】
 
 
CSEE Journal of Power and Energy Systems
Pages 2517-2530

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Yu X, Gu J, Zhang X, et al. Non-unit Fault Location for MMC-HVDC Grids Based on Geometric Features of Fault Voltage. CSEE Journal of Power and Energy Systems, 2026, 12(5): 2517-2530. https://doi.org/10.17775/CSEEJPES.2022.06170

9

Views

0

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 23 September 2022
Revised: 14 January 2023
Accepted: 08 February 2023
Published: 14 December 2024
© 2022 CSEE.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).