AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (5.3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Regular Paper | Open Access

Aerodynamic Drag Reduction and Insulation Performance of Roof Insulator with Dimpled Non-smooth Surfaces

Yujun Guo, Chenguang Yang, Libin Yao, Kai Liu( ), Xueqin Zhang, Song Xiao, Wenfu Wei, Guangning Wu
School of Electrical Engineering, Southwest Jiaotong University, and also with the Railway Traction Power Supply Safety and Security Technology Innovation Team, Sichuan 610031, China
Show Author Information

Abstract

Aerodynamic drag generated by high-speed trains significantly affects trains’ operating cost and restricts a further increase in speed. Currently, the drag reduction method with streamlined bodies has reached its limit. The presence of external insulation equipment disrupts the roof’s smoothness, making it an important source of aerodynamic drag. However, roof equipment also assumes an essential role of electrical insulation, so both aerodynamic characteristics and insulation performance need to be considered. Therefore, a drag reduction method based on the non-smooth structure is proposed for the roof insulator, in which aerodynamic characteristics on and around the insulator are changed by constructing dimpled surfaces on the sheds. In this study, parameters of dimple structure with an excellent drag reduction effect were determined, achieving a drag reduction rate of 17.51%. Simulations and experiments were conducted to verify that the dimpled insulator exhibits good electrical insulation performance. Finally, a mechanism analysis of drag reduction with a dimpled structure was provided in terms of velocity vector, turbulent kinetic energy and turbulent dissipation rate. This study provides guidance for drag reduction of external insulation equipment and energy savings of high-speed trains.

References

【1】
【1】
 
 
CSEE Journal of Power and Energy Systems
Pages 2594-2604

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Guo Y, Yang C, Yao L, et al. Aerodynamic Drag Reduction and Insulation Performance of Roof Insulator with Dimpled Non-smooth Surfaces. CSEE Journal of Power and Energy Systems, 2026, 12(5): 2594-2604. https://doi.org/10.17775/CSEEJPES.2022.04340

11

Views

0

Downloads

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 01 July 2022
Revised: 27 September 2022
Accepted: 03 November 2022
Published: 28 December 2023
© 2022 CSEE.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).